Каталог Dormer Pramet фрезерование 2021 - 2022 - страница 619

Предыдущая страница Следующая страница

Навигация

Suitability and starting valuesfor cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.
REPMKN SH
Product[mm]vc [m/min]f ap [mm/tooth] [mm]vc f [m/min] [mm/tooth]ap vc f ap [mm] [m/min] [mm/tooth] [mm]vc f ap vc f [m/min] [mm/tooth] [mm] [m/min] [mm/toothap ] [mm]vc f [m/min] [mm/toothap ] [mm]
10° 028° ,08MM geoHFC S metry with highlypositive designfor high feed machining.
BNGX 10T308SR-MMM63300.82150.65 0.6150 0.590.6 – – –– – – 60 0.460.5– ––
M83100.82550.65 0.6130 0.590.6 – – –– – – – ––– ––
M83300.82450.65 0.6145 0.590.6 – – –– – – 60 0.460.5– ––
M83400.82300.65 0.6135 0.590.6 – – –– – – 55 0.460.5– ––
M83450.81800.65 0.6105 0.590.6 – – –– – – 45 0.460.5– ––
M93250.82800.65 0.6– –– – – –– – – – ––– ––
M93400.82500.65 0.6150 0.590.6 – – –– – – 60 0.460.5– ––
14° 0,09 14°HFCS
HM geometry with strongdesign for highfeed machining.
BNGX 10T308SR-HM82150.8–– –– –– 290 0.30 0.4– – – – ––60 0.151.0
M83100.8–– –– –– 305 0.30 0.4– – – – ––65 0.151.0
M83300.8–– –– –– 285 0.30 0.4– – – – ––60 0.151.0
ANHX 10
W1D1LS
[mm][mm][mm][mm]
10T3 5.8002.769.724.70RE
L D1 SW1

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.

PMKNSH
RE
Product
vcf apvcap f vcfapvcfapvcfapvcfap
[mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm]
S
0,05W
31°
12°F geometry with positive design for finish and semi-finish machining.
ANHX 10T320SR-F M83102.0380 0.10 2.5190 0.09 2.5––––––––––––
M83302.0340 0.10 2.5200 0.09 2.5––––––––––––