Каталог Dormer Pramet фрезерование 2021 - 2022 - страница 583

Предыдущая страница Следующая страница

Навигация

Suitability and starting values for cutting speed (vc), feed (f)and depth of cut(ap). Refer toour MachiningCalculator appfor further calculations.
REPMKNSH
Productvcfapvc fap vcfapvc fapvcfapvc fap
[mm][m/min][mm/tooth][mm][m/min] [mm/tooth][mm] [m/min][mm/tooth][mm][m/min] [mm/tooth][mm][m/min][mm/tooth][mm][m/min] [mm/tooth][mm]
KP geomE etry withzerorake angle designfor light to medium machining.
LC 2016-KPM43101.62800.160.8– –– 2650.160.8– –––––55 0.151.0
M83101.63250.160.8– –– 3050.160.8– –––––65 0.151.0
LC 2040-KPM83304.02850.162.0– –– 2700.162.0– –––––55 0.151.0
11°KPF geomF etry with positive design for light to medium machining.
LC 0806-KPFM43100.62800.160.3140 0.140.3 2650.160.3– –––––55 0.151.0
LC 1008-KPFM43100.82700.160.4135 0.140.4 2550.160.4– –––––50 0.151.0
LC 1210-KPFM43101.02800.160.5140 0.140.5 2650.160.5– –––––55 0.151.0
M83301.02950.160.5175 0.140.5 2800.160.5– –––––55 0.151.0
LC 1613-KPFM43101.32700.160.7135 0.140.7 2550.160.7– –––––50 0.151.0
LC 2016-KPFM43101.62800.160.8140 0.140.8 2650.160.8– –––––55 0.151.0

LC 12-CH

CDID1LS
[mm][mm][mm][mm]
124512.05.0014.002.50

KRINS

S CDI

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.

PMKNSH
RE
Product
vcfapvcfapvcfapvcfapvcfapvcfap
[mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm]
E
CH geometry with zero rake angle design for light to medium machining.
LC 1245-CHM4310–225 0.20 2.0–––210 0.20 2.0––––––45 0.15 1.0