Каталог Dormer Pramet фрезерование 2021 - 2022 - страница 553

Предыдущая страница Следующая страница

Навигация

INSDD1S
1003[mm] 10.0[mm] 3.90[mm] 3.18

15° INSD S

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.

REPMKNSH
Productvcfapvc f apvcfapvcfapvcfapvcfap
[mm][m/min][mm/tooth][mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth][mm][m/min][mm/tooth][mm][m/min][mm/tooth][mm][m/min] [mm/tooth] [mm]
0,1017,5°HFCT
20°Positive d iesign fo ir finishi machining.
RDGT 1003MOTM6330–2900.151.0205 0.14 1.0––––––850.120.8–––
M8310–3750.151.0190 0.14 1.03550.151.0–––––––––
M8325–2800.151.0130 0.14 1.0––––––––––––
M8345–2500.151.0150 0.14 1.0––––––600.120.8–––
M9340–3950.151.0235 0.14 1.0––––––950.120.8–––

RDHT 10-FA

INSDD1S
[mm][mm][mm]
100310.03.903.18

15° INSD S

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.

PMKNSH
RE
Product
vcfapvcfapvcfapvcap f vcfapvcfap
[mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm]
F
17,5°HFC
FA geometry with highly positive design for fine-finish to medium machining.
HF7 RDHT 1003MO-FA ––––––––––390 0.18 1.0––––––