Каталог Dormer Pramet фрезерование 2021 - 2022 - страница 496

Предыдущая страница Следующая страница

Навигация

LNET 16
W1D1LS
[mm][mm][mm][mm]
160613.2005.9016.406.38

92° L S

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.

REPM KNSH
Productvc fapvc f ap vc fapvc fapvcfapvcf ap
[mm][m/min] [mm/tooth][mm][m/min] [mm/tooth] [mm] [m/min] [mm/tooth] [mm][m/min] [mm/tooth][mm][m/min][mm/tooth][mm][m/min] [mm/tooth] [mm]
33° 8°0,15S
M geometry withhighly positive design for medium machining.
LNET 160616SR-MM83301.6110 0.1515.0– – – 100 0.1515.0– ––––––– –
M83401.6105 0.1515.0– – – 95 0.1515.0– ––––––– –
19° 15°0,121S
R geometry withhighly positive design for medium machining.
LNET 160616SR-RM83301.6100 0.1515.0– – – 95 0.1515.0– ––––––– –
M83401.695 0.1515.0– – – 90 0.1515.0– ––––––– –

SNGX 13

ICD1S
[mm][mm][mm]RE
130513.2005.905.96

IC = L S

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.

PMKNSH
RE
Product
vcfapvcfapvcfapvcfapvcfapvcfap
[mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm]

S 0,12 8° 26°

M geometry with positive design for light machining.

SNGX 130512SN-MM83301.2105 0.15 12.0–––95 0.15 12.0–––––––––
M83401.2105 0.15 12.0–––95 0.15 12.0–––––––––