Каталог Dormer Pramet фрезерование 2021 - 2022 - страница 471

Предыдущая страница Следующая страница

Навигация

AC002KS1635K.FMH32
AC003KS2040K.FMH40

SOMT 09

ICD1LS
[mm][mm][mm][mm]RE
09T39.5503.509.553.97

18° IC = L S

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Conditions are valid for setting angle 90°. Refer to our Machining Calculator app for further calculations.

PdREPMKNSH
rouct[mm]vc [m/min]f [mm/tooth]ap [mm]vc f [m/min] [mm/tooth]ap vc [mm] [m/min] [f mm/tooth]ap [mm]vc [m/min]f [mm/tooth]ap [mm]vc [m/min]f [mm/tooth]ap [mm]vc [m/min] [f mm/toothap ] [mm]
0,12 15°1S
0°M geometry withpositive design for medium machining.
SOMT 09T308-M82150.82750.142.5165 0.132.5 2600.142.5–––650.132.0–––
M53150.83900.142.5– –– 3700.142.5–––––––––
M83300.82700.142.5160 0.132.5 2550.142.5–––650.132.0–––
M83400.82500.142.5150 0.132.5 2350.142.5–––600.132.0–––
M93150.83800.142.5– –– 3600.142.5–––––––––
0,06 18°S
14°MI geometry with stable positive designfor medium machining.
SOMT 09T304-MI82150.42300.142.5135 0.132.5 2150.142.5–––550.102.0–––
M83100.42550.142.5130 0.132.5 2400.142.5–––––––––
M83300.42300.142.5135 0.132.5 2150.142.5–––550.102.0–––
M83400.42100.142.5125 0.132.5 1950.142.5–––500.102.0–––
M93150.43200.142.5– –– 3000.142.5–––––––––
M93400.42650.142.5155 0.132.5 ––––––650.102.0–––
0,07 18°S
14°P geometry withhighly positive design for medium machining.
SOMT 09T304-PM83300.42500.142.5150 0.132.5 2350.142.5–––600.102.0–––
M83400.42300.142.5135 0.132.5 2150.142.5–––550.102.0–––
M93250.43200.142.5– –– 3000.142.5–––––––––