Каталог Dormer Pramet фрезерование 2021 - 2022 - страница 464

Предыдущая страница Следующая страница

Навигация

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer toour Machining Calculator app for further calculations.
REPM KNSH
Productvcfapvc f ap vc f apvc fapvc f apvc fap
[mm][m/min][mm/tooth][mm][m/min] [mm/tooth] [mm] [m/min] [mm/tooth] [mm][m/min] [mm/tooth][mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth][mm]
19° 15° 0,12R geometS ry withpositivestable design for medium machining.
LNMU 160716SR-RM8330 1.62150.186.3– – – 200 0.18 6.3– ––– – –40 0.151.0
M8340 1.61950.186.3– – – 185 0.18 6.3– ––– – –– ––
M9315 1.62850.186.3– – – 270 0.18 6.3– ––– – –55 0.151.0
M9325 1.62650.186.3– – – 250 0.18 6.3– ––– – –50 0.151.0
LNGU 16
W1D1LS
[mm][mm][mm][mm]RE
1607 13.2005.7016.607.50LD1
W1S

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.

PMKNSH
RE
Product
vcfap vcfapvcap f vcfapvcfapvcfap
[mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm][m/min] [mm/tooth] [mm]
1S
0,12
19°
15°M geometry with highly positive design for medium machining.
LNGU 160708SR-M 82150.8200 0.18 5.0–––190 0.18 5.0––––––40 0.15 1.0
M83400.8180 0.18 5.0–––170 0.18 5.0–––––––––
M93150.8265 0.18 5.0–––250 0.18 5.0––––––50 0.15 1.0
M93250.8250 0.18 5.0–––235 0.18 5.0––––––50 0.15 1.0