Каталог Dormer Pramet фрезерование 2021 - 2022 - страница 431

Предыдущая страница Следующая страница

Навигация

GI165ADMX 1606..ADEX 1606..
Nm
SQ030US4008-T15P3.5M 48––FlagT15P––––
SQ031US4011-T15P3.5M 410.6D-T08P/T15PFG-15–––––
SQ032US4008-T15P3.5M 48D-T08P/T15PFG-15–HS 0830C–––
SQ033US4011-T15P3.5M 410.6D-T08P/T15PFG-15–HS1030C–––
SQ036US4011-T15P3.5M 410.6D-T08P/T15PFG-15–HS1240CCAC160CHSD0825CHXK5
AC001KS1230K.FMH27
AC002KS1635K.FMH32
AC003KS2040K.FMH40

ADMX 16

W1D1LS
[mm][mm][mm][mm]RE
16069.9504.5016.006.25

15° L S

Suitability and starting valuesfor cutting speed (vc), feed (f) and depth of cut(ap). Refer toour Machining Calculator app for further calculations.
REPMKNSH
Productvc fapvc fap vc fapvc fapvcfapvcfap
[mm][m/min] [mm/tooth][mm][m/min] [mm/tooth][mm] [m/min] [mm/tooth][mm][m/min] [mm/tooth][mm][m/min] [mm/tooth][mm][m/min] [mm/tooth] [mm]
25° 0,1F geometry withS highly positive design for light to medium machining.
ADMX 160608SR-F8215 0.8265 0.152.0155 0.142.0 250 0.152.0795 0.182.065 0.111.6–––
M8310 0.8285 0.152.0145 0.142.0 270 0.152.0– ––––––––
M8330 0.8260 0.152.0155 0.142.0 245 0.152.0780 0.182.065 0.111.6–––
M8340 0.8235 0.152.0140 0.142.0 220 0.152.0– ––55 0.111.6–––
M9340 0.8300 0.152.0180 0.142.0 – ––– ––75 0.111.6–––
24° 0,171S
M geometry withpositivedesign for lightto medium machining.
ADMX 160604SR-M8215 0.4190 0.185.0110 0.165.0 180 0.185.0– ––45 0.134.0–––
M8330 0.4190 0.185.0110 0.165.0 180 0.185.0– ––45 0.134.0–––
M8340 0.4170 0.185.0100 0.165.0 160 0.185.0– ––40 0.134.0–––