Каталог Dormer Pramet фрезерование 2021 - 2022 - страница 358

Предыдущая страница Следующая страница

Навигация

Nm
FA021US 54511-T15P5.0M 4.511D-T08P/T15PFG-15––––––
FA023US 54511-T15P5.0M 4.511D-T08P/T15PFG-15HS1030C–––––
FA026US 54511-T15P5.0M 4.511D-T08P/T15PFG-15HS1240CCAC160CHSD0825CHXK5––
FA027US 54511-T15P5.0M 4.511D-T08P/T15PFG-15HS1655CCAC200CHSD 1025CHXK 7––
FA028US 54511-T15P5.0M 4.511D-T08P/T15PFG-15HS1655CCAC250CHSD 1025CHXK 7––
FA029US 54511-T15P5.0M 4.511D-T08P/T15PFG-15HS1655CCAC 315CHSD 1035CHXK 7CACP315OCRRH34
AC001KS1230K.FMH27
AC002KS1635K.FMH32
AC003KS2040K.FMH40
HNGX 09
IC D1S
[mm] [mm][mm]
090616.500 4.906.35

IC S

Suitability and starting values for cutting speed (vc), feed (f) and depth of cut (ap). Refer to our Machining Calculator app for further calculations.

PdREPMKNSH
rouct[mm]vc [m/min]f [mm/tooth]ap [mm]vc f [m/min] [mm/tooth]ap [mm]vc [m/min] [f mm/toothap ] [mm]vc [m/min]f [mm/tooth]ap [mm]vc [m/min][mm/f tooth]ap [mm]vc [m/min] [f mm/toothap ] [mm]
22°E
FF geometry withhighlypositive designfor lightmachining.
HNGX 0906ANEN-FF8215–3450.101.0205 0.091.0––––––––––––
M8330–3350.101.0200 0.091.0––––––––––––
M9340–4050.101.0240 0.091.0––––––––––––
0 22°,07S
F geometry withhighly positive design for light to medium machining.
HNGX 0906ANSN-F8215–3000.122.1180 0.112.1––––––––––––
M6330–2550.122.1180 0.112.1––––––––––––
M8310–3300.122.1165 0.112.1––––––––––––
M8330–3000.122.1180 0.112.1––––––––––––
M8340–2700.122.1160 0.112.1––––––––––––