Основной каталог Kyocera 2021 - 2022 - страница 14

Предыдущая страница Следующая страница

Навигация

CVD coated carbide (Turning)

CVD coated carbide

Using chemical vapor deposition coating technology, CVD coated

carbide grades provide stable, efficient machining at high speeds

or for heavy interrupted applications.

Features

  • Applicable from low to high speed machining and from finishing to roughing
  • Stable machining is achieved due to the superior toughness and crack resistance
  • Cutting times are reduced due to good chip control from effective chipbreakers

Features of CVD coated carbide

ClassificationGradeColorCoated compositionAdvantages and applications
CA510TiCN+Al2O3+TiN• Special substrate with thermal deformation resistance along with a thick and tough coating layer providing high wear resistance • Application: High speed and high efficiency steel machining
CA515TiCN+Al2O3+TiN• Improved wear resistance and stability due to special substrate with heat deformation resistance and hard and tough coating layer with reinforced interface • Application: Light interrupted machiningof steel
CA025PTiCN+Al2O3+TiN• CVD coating with improved wear resistance. Adopted base material, excellent chipping resistance, resistance to wear and resistance to improve chip performance • Application: Continuous to interrupted processing of steel
SteelCA525TiCN+Al2O3+TiN• Stable and long tool life machining due to special substrate with heat deformation resistance and tougher coating layer and reinforced interface • Application: Interrupted togeneral machiningof steel
CA530GoldTiCN+Al2O3+TiN• Special tough substrate and tough coating layer providing high stability and wear resistance • Application: General to heavyinterrupted machining (stabilityoriented)
CA5505TiCN+Al2O3+TiN• Application: High speed continuous machining of steel, continuous to light interrupted machining of cast iron
CA5515TiCN+Al2O3+TiN• Application: Machining of steel, continuous to light interruption
CA5525TiCN+Al2O3+TiN• Application: For general machining of steel, roughing to interruption
CA5535TiCN+Al2O3+TiN• Application: Roughing to heavy interrupted machining of steel
CR9025TiCN+TiN• Improved toughness and stability due to specialized carbide substrate with plastic deformation resistance • Application: Cut-off, groovingand multi-function machiningof steel
Stil tlCA6515TiCN+Al2O3+TiN• Specialized carbide substrate for machining stainless steel, excellent wear resistance • Application: Continuous machiningof stainless steel
aness seeCA6525TiCN+Al2O3+TiN• Specialized carbide substrate for machining stainless steel, excellent notching resistance and toughness • Application: First choice forgeneral machiningof stainless steel,from finishingto roughing,continuous to interruption
CA310TiCN+Al2O3+Ti base• Grade for high-speed continuous machining and improved tool life through the deposition of a thickened Al2O3 coating layer • Application : For finishingto roughingofgraycast iron
CA315Rose GoldTiCN+Al2O3+Ti base• Both high abrasion resistance and stability are compatible, high efficiency and long life performance are demonstrated. Can be adapted to both continuous machining and interrupted machining. • Application: Compatible with a wide processing area for cast iron and gray cast iron. First recommendation for cast iron
Cast ironCA320TiCN+Al2O3+Ti base• Improved stability with CVD layer structure with high adhesion • Application : Heavily interrupted or High-speed machining for Nodular Cast Iron. The 1st Recommendation for the FCD500 or higher application
CA4505TiCN+Al2O3• Stable, longer tool life due to improved bonding strength of coating layers and special treatment of the surface of the top coating layer • Application: Forgraycast iron and nodular cast iron at high speed in continuous to light interrupted machining
CA4515Blackish grayTiCN+Al2O3• Stable, longer tool life due to improved bonding strength of coating layers and special treatment of the surface of the top coating layer • Application: First choice for gray cast iron and nodular cast iron in light to heavy interrupted machining