Общий каталог Tungaloy 2020 - 2021 - страница 1575

Предыдущая страница Следующая страница

Навигация

WF WF BHBH GradeInsertExt. ToolholderInt. ToolholderThreadingGroovingMiniature toolMilling cutterEndmillDrilling toolTooling SystemUser's GuideIndex PN PSSN-CA A Lever-lock cartridge, with 45° approach angle, for negative 90° square inserts Square insert45˚Cutting edge style S Main application45° Inner 45° chamfering(PSSN type can not be used forexternal chamfering)t20D°MIN B45°HF16CA10CA,12CAGAMFGAMPRELHe1L3LFDMIN2(Mounting angle)Right hand (R) shown.C Designation DMIN DMIN2 RE** WF LF LH HF H B e1 L3 GAMF GAMP t Insert PSSNR/L10CA-09 40 55 0.8 14 44 10 10 14.5 10 20 8 -12° 0° 5 SN**0903... PSSNR/L12CA-12 50 75 0.8 20 47 12 12 19.5 15 20 8 -12° 0° 6 SN**1204...PSSNR/L16CA55750.8255328161617258-11°0°0SN**1204...• In the above table, DMIN is the minimum bore diameter for axial mounting, and DMIN2 is for radial mounting.D • Hand of the insert to be used should be selected depending on the application. • **RE: Standard corner radius SPARE PARTSDesignation Cartridge setting screw 1 Cartridge setting screw 2 Wrench 1 Wrench 2 Wrench 3 Radial adjusting screwPSSNR/L10CA-09-CHHM4-4P-5P-2F-SSHM4-4 E PSSNR/L12CA-12 - CHHM6-25 P-2 P-2.5 P-5 SSHM4-4 PSSNR/L16CA BHM8-25U CHHM6-25 P-2.5 P-3 P-5 SSHM5-6 Designation Shim Lever Cartridge setting Axial adjustingscrewscrewShim retainer Sizing plate Sizing plate ass’y(Optional parts)(Optional parts)F PSSNR/L10CA-09 - LCL32N LCS22 ASM54 - - PSTR/L10 PSSNR/L12CA-12 - LCL43N LCS43 ASM54 - - PSTR/L12 PSSNR/L16CA LSS42CA LCL4 LCS4CA ASM6 LSP4 S0816B/S1016B -• Cartridges for K-style cutting edge: S0816A or S1016A; S-style cutting edge: S0816C or S1016BG CP CSSP-CA Clamp-on cartridge, with 45° approach angle, for 11° clearance square inserts Square insert Main applicationInner and external 45° chamfering(PSSN type can not be used fort20D°MIN H external chamfering) 45˚Cutting edge style S 45° HF GAMF GAMP RE16CA10CA,12CALH e1 L3LFDMIN2(Mounting angle)Right hand (R) shown.I Designation DMIN DMIN2 RE** WF LF LH HF H B e1 L3 GAMF GAMP t Insert CSSPR/L10CA-09CSSPR/L12CA-12CSSPR16CA40 55 0.8 14 44 11 10 14.5 10 20 8 3° 0° 5 SP**0903...50750.82047131219.5152084°0°6SP**1203...55750.82553151616172580°0°0SP**1203...J • In the above table, DMIN is the minimum bore diameter for axial mounting, and DMIN2 is for radial mounting. • Hand of the insert to be used should be selected depending on the application. • **RE: Standard corner radius SPARE PARTSDesignation Cartridge setting screw 1 Cartridge setting screw 2 Wrench 1 Wrench 2 Wrench 3 Radial adjusting screwCSSPR/L10CA-09-CHHM6-15P-2P-2.5P-5SSHM4-10 K CSSPR/L12CA-12 - CHHM6-25 P-2 P-3 P-5 SSHM4-14 CSSPR16CA BHM8-25U - P-2.5 P-4 - SSHM5-16 Designation Shim Shim screw Clamping screw Axial adjustingscrewRadial adjustingscrewChipbreaker piece Sizing plate ass’y(Optional parts) L CSSPR/L10CA-09 - - CSG-5 (CSG-5S) ASM54 SSHM4-10 CBS-3M PSTR/L10 CSSPR/L12CA-12 - - CSG-6 (CSG-6S) ASM54 SSHM4-14 CBS-4M PSTR/L12 CSSPR16CA PAS-42 SM3X0.5X8 CSG-8S ASM6 SSHM5-16 - -• Cartridges for K-style cutting edge: S0816A or S1016A; S-style cutting edge: S0816C or S1016B• When not using chipbreaker piece, clamping screw in ( ) should be used.M Reference pages: PN PSSN-CA: Inserts → B075 -, CBN → B175, PCD → B193 CP CSSP-CA: Inserts → B134 -, CBN → B184, PCD → B195 Tungaloy K201