Общий каталог Tungaloy 2020 - 2021 - страница 934

Предыдущая страница Следующая страница

Навигация

Profile MillingSlot MillingShoulderMillingFace MillingHigh FeedMilling BD DCONWS S-TAQ System The world’s highest level repeatability S-TAQSystem ᭹ Improved surface quality and increased tool life • Two-face restricted (1/10 short taper and flange face) coupling. • High-level coupling performance contributes to high accuracy and excellent rigidity. • Excellent dynamic balance reduces vibration, chatter, and cutting noise at high speeds. ᭹ Labor-saving tool change ᭹ Improved productivity • Can eliminate detaching the toolholder from the main spindle. • High speed machining can reduce machining time. • Can eliminate the brakes for the main spindle. • High repeatability can eliminate trial cut. • Labor-saving clamping by only one T-wrench. Performance Part assembly Clamping wrench hole Original clamp system provides high rigidity, accuracy and Clamping piece R1 S/M operating speed. (wrench size/ Release pin screw size) ᭹ Clamping force (Strong clamp system) · Lubricant coating on clamping piece. · 4-points balancing clamp. · Sufficient clamping for the smaller diameter part of taper. Dimensions (mm) Recommend Clamping Designation S/M K clamping force R2 DCONWS BD R1 R2 torque (N·m) (N) R1 F TAQ32 19 32 18 8.5 3/M6 8 3 4×103 W TAQ40 24 40 21 10 3/M6 10 5 5.5×103 Clamping screw R2 TAQ50 30 50 25 12 4/M8 12 8 9×103 Cover ring Drive key TAQ63 38 63 32 15 4/M8 16 10 12×103 key size: K TAQ80 48 80 40 18 5/M10 18 20 18×103 W: Driving force by clamping screw TAQ100 60 100 50 22 6/M12 20 30 23×103 F: Clamping force R1 = R2: Receiving force of clamping piece DATA Comparison of clamping force Taper Taper dia.(mm) /holder dia.(mm)Recommendclamping torque (N/m)Draw-in force (N) Draw-in force / Torque (m-1) TAQ63 1 / 10 38 / 63 10 12×103 1200 QC adapter 10° 35 / 70 20 9.8×103 490 Other makes A 4° 35 / 62 22.5 9.8×103 436 ᭹Repeatability for accuracy Radial run out Within 0.003 mm Axial run out Within 0.002 mm Note: Measured at 150 mm far from end face. 150 H110 www.tungaloy.com