Общий каталог Tungaloy 2020 - 2021 - страница 1574

Предыдущая страница Следующая страница

Навигация

Others WF WF BHBH CP CTWP-CA Clamp-on cartridge, with 60° approach angle, for 11° clearance triangular inserts 60° Chamfering t 20D°MIN Through boring HF GAMF GAMP RE LH e1 L3 60˚ LF DMIN2 Cutting edge style W Right hand (R) shown. Designation DMIN DMIN2 RE** WF LF LH HF H B e1 L3 GAMF GAMP t Insert CTWPR10CA-11 40 55 0.4 14 44 13 10 14.5 10 20 8 4° 0° 5 TP**1103... CTWPR/L12CA-16 50 75 0.8 20 47 11 12 19.5 15 20 8 4° 0° 6 TP**1603... • In the above table, DMIN is the minimum bore diameter for axial mounting, and DMIN2 is for radial mounting. • Hand of the insert to be used should be selected depending on the application. • **RE: Standard corner radius SPARE PARTS Designation Cartridge setting screw Wrench 1 Wrench 2 Wrench 3 CTWPR10CA-11 CHHM6-15 P-2 P-2.5 P-5 CTWPR/L12CA-16 CHHM6-25 P-2 P-3 P-5 Designation Clamping screw Axial adjustingscrewRadial adjustingscrewChipbreaker pieceSizing plate ass’y(Optional parts) CTWPR/L10CA-11 CSG-5 (CSG-5S) ASM54 SSHM4-10 CBT-2M PSTR/L10 CTWPR/L12CA-16 CSG-6 (CSG-6S) ASM54 SSHM4-14 CBT-3M PSTR/L12 • Cartridges for K-style cutting edge: S0816A or S1016A; S-style cutting edge: S0816C or S1016B • When not using chipbreaker piece, clamping screw in ( ) should be used. • Hand of the insert to be used should be selected depending on the application. SP STWP-CA Screw-on cartridge, with 60° approach angle, for 11° clearance triangular inserts 60° Chamfering t 20D°MIN Through boring 60˚ HF GAMF GAMP RE LH e1 L3LF DMIN2 Cutting edge style W Right hand (R) shown. Designation DMIN DMIN2 RE** WF LF LH HF H B e1 L3 GAMF GAMP t Insert STWPR08CA-09 25 35 0.4 10 28 6 8 11.5 7.5 17 6 4° 0° 6 TP**0902... STWPR/L10CA-11 40 55 0.4 14 44 9 10 14.5 10 20 8 4° 0° 8 TP**1102... STWPR12CA-16 50 75 0.8 20 47 9 12 19.5 15 20 8 4° 0° 8 TP**16T3... • In above table, DMIN is min. bore dia. for axial mounting and DMIN2 is for radial mounting. • Hand of the insert to be used should be selected depending on the application. • **RE: Standard corner radius SPARE PARTS Designation Clamping screw Cartridge setting screw Wrench 1 Wrench 2 Wrench 3 STWPR08CA-09 CSTB-2.2S CHHM4-10 P-1.5 T-7F P-3 STWPR/L10CA-11 CSTB-2.5 CHHM6-15 P-2 T-8F P-5 STWPR12CA-16 CSTB-4S CHHM6-25 P-2 T-15F P-5 Designation Axial adjusting Radial adjusting Sizing plate ass’yscrewscrew(Optional parts) STWPR08CA-09 ASM34L SSHM3-6 PSTR/L08 STWPR/L10CA-11 ASM54 SSHM4-10 PSTR/L10 STWPR12CA-16 ASM54 SSHM4-14 PSTR/L12 Reference pages: CP CTWP-CA: Inserts → B142 -, CBN → B185 -, PCD → B196 SP STWP-CA: Inserts → B142 -, CBN → B185 -, PCD → B196 K200 www.tungaloy.com