Каталог Sumitomo резьбонарезной инструмент - страница 4
Навигация
Каталог Sumitomo фрезы со сменными пластинами
Каталог Sumitomo пластины с кубическим нитридом бора Sumiboron
Каталог Sumitomo инструмент для обработки канавок
Общий каталог Sumitomo 2018 - 2019
Каталог Sumitomo твердосплавные заготовки
Каталог Sumitomo модульные системы для револьверных головок токарных станков - F001
- F002
- F003
- F004
- F005
- F006
- F007
- F008
- F009
- F010
- F011
- F012
- F013
- F014
- F015
- F016
- F017
- F018
- F019
- F020
- F021
- F022
- F023
- F024
- F025
- F026
- F027
- F028
- F029
- F030
- F031
- F032
- F033
- F034
- F035
- F036
- F037
- F038
- F039
- F040
- F041
- F042
- F043
- F044
- F045
- F046
- F047
- F048
- F049
- F050
- F051
- F052
- F053
- F054
- F055
- F056
- F057
- F058
- F059
- F060
- F061
- F062
- F063
- F064
- F065
- F066
- F067
- F068
- F069
- F070
- F071
- F072
- F073
- F074
- F075
- F076
- F077
- F078
- F079
- F080
- F081
- F082
- F083
- F084
- F085
- F086
Series Table
- External Threading Tools
| Type | Appearance | Clam Clamp-on Screw-on | ping Retracting pin Lever lock | Feature | Applic thread | able symbol | |
| SSTE | `・` Utilizes a laydown 3-cornered insert. Achieving good surface finish with | M | W | ||||
| its sharp cutting edges and ground flank faces. | UNC/UNF | G/Rp/W | |||||
| `・`Stable chip control through its 3D mold chipbreaker | NPT | R/Rc | |||||
| `→`F68 | `・`A comprehensive lineup of inserts with wiper edges | NPTF | UNJ | ||||
| L | TE/ | `・`A lineup of strong clamping, lever-lock holders (shank size`□`25 to 32mm), | M | W | |||
| STE | as well as screw-on holders (shank size`□`12 to 16mm). `・`Economical M-Class lay down 3-cornered inserts. | UNC/UNF | G/Rp/W | ||||
| `・`Cermet inserts are available. | NPT | R/Rc | |||||
| `→`F78/F79 | `・`Stable chip control with molded chipbreaker. | NPTF | UNJ | ||||
| T | HE | `・`Utilizes a standing G-Class 3-cornered insert. | M | W | |||
| `・`Available in draw-pin type holders`□`25mm shank and screw-on holders `□`12mm and`□`16mm shank. | UNC/UNF NPT | G/Rp/W R/Rc | |||||
| `→`F80 | `・`Cermet inserts without wiper edges are available. | NPTF | UNJ | ||||
| G | ME-TH | M | W | ||||
| F | `・`2 corner insert for large pitch (3 to 6 mm) machining `・`A lineup of 11 to 4.5 threads/inch tools for 55° angle `・`Rigid clamping with a clamp metal | UNC/UNF NPT | G/Rp/W R/Rc | ||||
| ding ls | `→`F77 | NPTF | UNJ | ||||
| hrea Too | STH | `・`For small lathes with a shank size of`□`20 mm or less | M | W | |||
| T | `・`Able to perform threading with a space-saving tangential 2-cornered insert. | UNC/UNF | G/Rp/W | ||||
| Grooving | `・`Able to perform back threading operations with a bar feeder. | NPT | R/Rc | ||||
| Cut-Off Threading | `→`F76 | `・`Available in small pitch (From 0.2mm). | NPTF | UNJ |
- Internal Threading Tools
| Type | Appearance | Clamping Retracting pin Lever lock Clamp-on Screw-on | Feature | Min. machining diameter (mm) | Applic thread | able symbol |
| SSTI | `・`Utilizes a lay down 3-cornered insert. Achieving good surface | M | W | |||
| finish with its sharp cutting edges and ground flank faces. `・`Stable chip control through its 3D mold chipbreaker. | ø18 | UNC/UNF NPT | G/Rp/W R/Rc | |||
| `→`F68 | `・`A comprehensive lineup of inserts with wiper edges | NPTF | UNJ | |||
| STI | M | W | ||||
| `→`F81 | `・`Class M with economical, horizontally mounted 3 corner insert `・`Stable chip control with a chipbreaker `・`Cermet grade lineup | ø20 | UNC/UNF NPT NPTF | G/Rp/W R/Rc UNJ | ||
| STHI | M | W | ||||
| `→`F82 | `・`Can handle small diameter (inner diameter`φ`8mm and more) and small pitch (0.4 to 1.0 mm) `・`Perfect for machining small parts | ø8 | UNC/UNF NPT NPTF | G/Rp/W R/Rc UNJ | ||
| THI | M | W | ||||
| `→`F82 | `・`Good cutting performance with a G Class, 3 corner insert | ø18 | UNC/UNF NPT NPTF | G/Rp/W R/Rc UNJ |