Каталог Tungaloy инструмент для автоматов швейцарского типа - страница 216
Навигация
Общий каталог Tungaloy 2020 - 2021
Каталог Tungaloy глубокое сверление 2
Каталог Tungaloy зубофрезерование
Брошюра Tungaloy новая продукция
Каталог Tungaloy глубокое сверление 1
JXPS**R/L-F (with 3D chipbreaker, sharp edge) JXPG**R/L-F (Sharp edge)
RE RE
CDX CDX
PSIRR
INSL INSL
Right-hand (R) shown. Right-hand (R) shown.
CW SH725 CW SH725
Designation Designation
±0.025 RE R L CUTDIA CDX* INSL ±0.025 RE R L CUTDIA CDX* INSL PSIRR/L
| JXPS12R/L10F | 1 | 0.05 | | | 12 | 6.5 | 12.5 | JXPG06R/L10F | 1 | 0.05 | | | 6 | 3.5 | 10.5 | 0° | |
| JXPS12R/L15F | 1.5 | 0.05 | | | 12 | 6.5 | 12.5 | JXPG06R/L15F | 1.5 | 0.05 | | | 6 | 3.5 | 10.5 | 0° | |
| External | JXPS16R/L15F | 1.5 | 0.05 | | | 16 | 8.5 | 14.5 | JXPG06R/L10F-15 | 1 | 0.05 | | | 6 | 3.5 | 10.5 | 15° |
| JXPS20R/L20F | 2 | 0.05 | | | 20 | 10.5 | 16.5 | JXPG06R/L15F-15 | 1.5 | 0.05 | | | 6 | 3.5 | 10.5 | 15° | |
| * Max grooving depth (CDX) varies | : Line up | JXPG12R/L15F | 1.5 | 0.05 | | | 12 | 6.5 | 12.5 | 0° | |||||||
| Internal | depending on workpiece diameters. | CUTDIA: Max. parting-off dia. | |||||||||||||||
| p.14 (TR504-G) | Package quantity = 5 pcs. | JXPG12R/L20F | 2 | 0.05 | | | 12 | 6.5 | 12.5 | 0° |
(Refer to the table on
| for details) | JXPG12R/L15F-15 | 1.5 | 0.05 | | | 12 | 6.5 | 12.5 | 15° |
| JXPG12R/L20F-15 | 2 | 0.05 | | | 12 | 6.5 | 12.5 | 15° |
Face
| JXPG16R/L15F | 1.5 | 0.05 | | | 16 | 8.5 | 14.5 | 0° |
| JXPG16R/L20F | 2 | 0.05 | | | 16 | 8.5 | 14.5 | 0° |
| Parting JXPG16R/L15F-15 | 1.5 | 0.05 | | | 16 | 8.5 | 14.5 | 15° |
| JXPG16R/L20F-15 | 2 | 0.05 | | | 16 | 8.5 | 14.5 | 15° |
| JXPG20R/L15F | 1.5 | 0.05 | | | 20 | 10.5 | 16.5 | 0° |
| JXPG20R/L20F | 2 | 0.05 | | | 20 | 10.5 | 16.5 | 0° |
| JXPG20R/L15F-15 | 1.5 | 0.05 | | | 20 | 10.5 | 16.5 | 15° |
| JXPG20R/L20F-15 | 2 | 0.05 | | | 20 | 10.5 | 16.5 | 15° |
* Max grooving depth (CDX) varies : Line up depending on workpiece diameters. CUTDIA: Max. parting-off dia. (Refer to the table on p.14 (TR504-G) Package quantity = 5 pcs. for details)
STANDARD CUT TING CONDITIONS (Par ting-of f )
Cutting speed Feed
ISO Workpiece materials Grades
Vc (m/min) f (mm/rev)
Low carbon steels
S15C, SS400, etc. SH725 50 - 200 0.01 - 0.05
C15, C20, etc. Carbon steels, Alloy steels
S55C, SCM440, etc. SH725 50 - 200 0.01 - 0.05
C55, 42CrMo4, etc.
Free cutting steels SH725 50 - 200 0.01 - 0.05
SUH22, SUH23, etc Stainless steels
SUS304, SUS316, etc. SH725 50 - 200 0.01 - 0.05
X5CrNi18-9, X5CrNiMo17-12-3, etc.
Aluminium alloys SH725 150 - 200 0.01 - 0.05
A5056, A6061, etc.
Copper alloy SH725 100 - 200 0.01 - 0.05
C2600, C280C, etc.
Titanium alloys SH725 30 - 80 0.01 - 0.05
Ti-6AI-4V, etc.
Superalloys SH725 30 - 80 0.01 - 0.05
Inconel718, etc.