Каталог Tungaloy инструмент для автоматов швейцарского типа - страница 215

Предыдущая страница Следующая страница

Навигация

CWN-CWN- CWXCWX WFHFWFHF 5HBH5HBH 5.75.7 BH BH WFWF CWCW 5.75.7 GradeInsertExt. ToolholderInt. ToolholderThreadingGroovingEndmillDrilling ToolTechnical Reference JSXXR/L-X-S-CHPPartingtoolholderwith high pressure coolant capability, for Swiss lathes (for sub spindle) 1 Right-hand LH LF Left-hand 5/16”-24UNF LH 2 Designation CWN CWX H B LF** LH** HF WF HBH Insert Torque* JSXXR/L1212X09-S-CHP*** 1 2 12 12 120 30 12 0.2 /5.5 4 JX*G06...,12...,16..., 20... 1.2 JSXXR/L1212X09B-S-CHP 1 2 12 12 120 30 12 0.2 /5.5 2 JX*G06...,12...,16..., 20... 1.2 JSXXR/L1616X09-S-CHP*** 1 2 16 16 120 30 16 0.2 /5.5 1.5 JX*G06...,12...,16..., 20... 1.2 JSXXR/L1616X09B-S-CHP 1 2 16 16 120 30 16 0.2 /5.5 - JX*G06...,12...,16..., 20... 1.2*Torque: Recommended clamping torque (N∙m)**LF (Overall Tool Length) and LH (Head Length) values shown above are true with JXPG16... insert. Both LF and LH will be 2 mm shorter than the above value with JX*G12... and3 JXPG20... inserts; 4 mm shorter with JXPG06... insert. ***To be replaced with the new design Use the right-hand insert (JX****R...) for a right-hand holder (JSXXR...); the left-hand insert (JX****L...) for a left-hand holder (JSXXL...). Compatible to the direct internal coolant supply system without the use of external coolant hose. SPARE PARTSDesignation Clamping screw Wrench 1 Coolant plug Wrench 2 DirectJet plug Wrench 3JSXXR***-S-CHPCSTC-4L055DLT-1008/5SR5/16UNFTL360P-4SSHM4-6-TBP-24 JSXXL***-S-CHP CSTC-4L055DR T-1008/5 SR5/16UNFTL360 P-4 SSHM4-6-TB P-2 Parting-off widths : 1 mm and 1.5 mm (for a max parting diameter of ø6 mm) : 1.5 mm and 2 mm (for max parting diameters of ø12 mm, ø16 mm and ø20 mm) 5 JSXXR/L-F-S-CHP Parting toolholder with high pressure coolant capability, for Swiss lathes (for sub spindle) LF Right-hand LH Left-hand 5/16”-24UNF LH 6 Designation CWN CWX H B LF** LH** HF WF HBH Insert Torque* JSXXR/L1212F09-S-CHP*** 1 2 12 12 85 26 12 0.2 /5.5 4 JX*G06...,12...,16..., 20... 1.2JSXXR/L1212F09B-S-CHP1212128530120.2 /5.52JX*G06...,12...,16..., 20...1.2*Torque: Recommended clamping torque (N∙m)7 **LF (Overall Tool Length) and LH (Head Length) values shown above are true with JXPG16... insert. Both LF and LH will be 2 mm shorter than the above value with JX*G12... and JXPG20... inserts; 4 mm shorter with JXPG06... insert. ***To be replaced with the new design Use the right-hand insert (JX****R...) for a right-hand holder (JSXXR...); the left-hand insert (JX****L...) for a left-hand holder (JSXXL...). SPARE PARTSDesignation Clamping screw Wrench 1 Coolant plug Wrench 2JSXXR***-S-CHPCSTC-4L055DLT-1008/5SR5/16UNFTL360P-4 8 JSXXL***-S-CHP CSTC-4L055DR T-1008/5 SR5/16UNFTL360 P-4 Parting-off widths : 1 mm and 1.5 mm (for a max parting diameter of ø6 mm) : 1.5 mm and 2 mm (for max parting diameters of ø12 mm, ø16 mm and ø20 mm) 9 Referent pages : Inserts, Standard cutting conditions → 6-10 Parts for coolant hose → 3-61 6-9