Каталог Tungaloy инструмент для автоматов швейцарского типа - страница 214

Предыдущая страница Следующая страница

Навигация

CWN- CWX WFHFCWN-CWXWFHF 5 HBH5 HBH BH BH WF WF JSXXR/L-X-CHP Parting tool with high pressure coolant capability for swiss lathes Right-hand LF Left-hand LH 5/16”-24UNF HBL Designation CWN CWX H B LF** LH** HF WF HBL** HBH Insert Torque* JSXXR/L1012H09-CHP 1 2 10 12 0.2/11.8 ≤ 102 10 3 ≤ 19.2 18.7 JX*G06...,12...,16..., 20... 1.2 JSXXR/L1212X09-CHP 1 2 12 12 0.2/11.8 ≤ 120 12 2 ≤ 19.4 18.8 JX*G06...,12...,16..., 20... 1.2 External JSXXR1616X09-CHP*** 1 2 16 16 0.2/15.8 ≤ 120 16 2.5 ≤ 19.4 18.7 JX*G06...,12...,16..., 20... 1.2 JSXXR/L1616X09B-CHP 1 2 16 16 0.2 /15.8 ≤ 120 16 - ≤ 19.4 18.7 JX*G06...,12...,16..., 20... 1.2 *Torque: Recommended clamping torque (N∙m) **LF (Functional Length) LH (Head Length), and HBL (Head-Bottom offset Length) values shown above are true with JX**16... insert. LF, LH, and HBL will all be 2 mm shorter than Internal the above values with JX**12... and JX**20... inserts, and 4 mm shorter for JX**06... insert. ***To be replaced with the new design Use the right-hand insert (JX****R...) for a right-hand holder (JSXXR...); the left-hand insert (JX****L...) for a left-hand holder (JSXXL...). Compatible to the direct internal coolant supply system without the use of external coolant hose. Face SPARE PARTS Designation Clamping screw Wrench 1 Coolant plug Wrench 2 DirectJet plug Wrench 3 Parting JSXXR... CSTC-4L100DL T-1008/5 SR5/16UNFTL360 P-4 SSHM4-6-TB P-2 JSXXL... CSTC-4L100DR T-1008/5 SR5/16UNFTL360 P-4 SSHM4-6-TB P-2 Parting-off widths : 1 mm and 1.5 mm (for a max parting diameter of ø6 mm) : 1.5 mm and 2 mm (for max parting diameters of ø12 mm, ø16 mm and ø20 mm) Threading pitch range : 0.2 mm - 1.5 mm JSXXR/L-F-CHP Parting tool with high pressure coolant capability for swiss lathes LF Right-hand Left-hand LH 5/16”-24UNF HBL Designation CWN CWX H B LF** LH** HF WF HBL** HBH Insert Torque* JSXXR/L1212F09-CHP 1 2 12 12 85 ≤ 19.4 12 0.2/11.8 - 2 JX*G06...,12...,16..., 20... 1.2 *Torque: Recommended clamping torque (N∙m) **LF (Functional Length) LH (Head Length), and HBL (Head-Bottom offset Length) values shown above are true with JXPG16... insert. LF, LH, and HBL will all be 2 mm shorter than the above values with JX*G12... and JXPG20... inserts, and 4 mm shorter for JXPG06... insert. Use the right-hand insert (JX****R...) for a right-hand holder (JSXXR...); the left-hand insert (JX****L...) for a left-hand holder (JSXXL...). SPARE PARTS Designation Clamping screw Wrench 1 Coolant plug Wrench 2 JSXXR... CSTC-4L100DL T-1008/5 SR5/16UNFTL360 P-4 JSXXL... CSTC-4L100DR T-1008/5 SR5/16UNFTL360 P-4 Parting-off widths : 1 mm and 1.5 mm (for a max parting diameter of ø6 mm) : 1.5 mm and 2 mm (for max parting diameters of ø12 mm, ø16 mm and ø20 mm) Threading pitch range : 0.2 mm - 1.5 mm Referent pages : Inserts, Standard cutting conditions → 6-10 Parts for coolant hose → 3-61 6-8