Каталог Tungaloy инструмент для автоматов швейцарского типа - страница 217

Предыдущая страница Следующая страница

Навигация

HOW TO SELECT TOOLS 1

Large-diameter machining of workpiece with rigidity Small-diameter machining of workpiece with short overhang

Sub-spindle tooling

Main-spindle toolingSub-spindle toolingWorkpiece with long overhang
Short workpiece
at the side of sub-spindle for
the process after parting-offwith low rigidity
2
Main spindle Sub-spindleMain spindle Sub-spindleMain spindle Main spindle Sub-spindle
Position of parting-off is at thePosition of parting-off is at thePosition of parting-off is at the sidePosition of parting-off is at the side
side of the main spindleside of the sub-spindleof the main spindle3 of the sub-spindle
Toolholder R-hand (JSXXR type)L-hand (JSXXL type)R-hand (JSXXR-S type)L-hand (JSXXL-S type)
Right-hand insert with lead
Insert angle to remove center coreLeft-hand insertRight-hand insertLeft-hand insert
(JXPG**L*** type)(JXPG**R*** type)(JXPG**L*** type)

(JXPG**R***-15 type)

Sub-spindle dia.Parting-off dia.BLFInsertToolholder
ø40~ ø610116JXPG06JSXXR/L1010X09-S
ø40~ ø61281JXPG06JSXXR/L1212F09-S
ø40~ ø1210118JXPG12JSXXR/L1010X09-S
ø40~ ø121283JXPG12JSXXR/L1212F09-S
ø40~ ø1610120JXPG16JSXXR/L1010X09-S
ø40~ ø161285JXPG16JSXXR/L1212F09-S
ø40~ ø201287JXPG20JSXXR/L1212F09B-S-CHP
ø50~ ø612116JXPG06JSXXR/L1212X09-S
ø50~ ø616116JXPG06JSXXR/L1616X09-S
ø50~ ø1212118JXPG12JSXXR/L1212X09-S
ø50~ ø1216118JXPG12JSXXR/L1616X09-S
ø50~ ø161285JXPG16JSXXR/L1212F09-S
ø50~ ø1612120JXPG16JSXXR/L1212X09-S
ø50~ ø1616120JXPG16JSXXR/L1616X09-S
ø50~ ø201287JXPG20JSXXR/L1212F09B-S-CHP
ø50~ ø2012122JXPG20JSXXR/L1212X09B-S-CHP
ø50~ ø2016122JXPG20JSXXR/L1616X09-S
ø50~ ø2016122JXPG20*
MA X. PARTING-OFF DIA . & DEPTH
Main-spindle toolingSub-spindle tooling

Main spindle Sub-spindle Main spindle

There will be no tool-workpiece interference when parting off the workpiece with the cutting edge position apart from the workpiece center by 0.8 mm or more.

JSXXR/L1616X09-S

7

8

9