Общий каталог Mitsubishi 2020 - 2021 - страница 737

Предыдущая страница Следующая страница

Навигация

Tooling system for turning on multi-task machines HSK-T TOOLS High accuracy cutting HSK-T System edge positioning HSK-T is a new HSK system designed The HSK-T type has a closer tolerance for turning on multi-task machines that between the spindle key and tool holder are compatible with HSK-A type (ISO keyway than the HSK-A type. This standard: ISO12164-1:2001). results in higher cutting edge positional The HSK system was developed accuracies. For milling, the conventional by a consortium of 17 Japanese HSK-A type tools can be still used. manufacturers and registered in ISO standard (ISO12164-3:2008) under the name HSK-T type in 2008 and JIS standard (JIS B6064-3) in 2013. Compatible with both multi-task machines and machining centers H HSK-TTurning tool holder HSK-T spindleMulti-task machines HSK-ARotating tool holder HSK-A spindleMachining center Neck length HSK-T63 Min.4 mm *Note HSK-T100 Min.5 mm Short neck length from the flange with thick body of the HSK-T turning tool as shown in the figure at the left. Because there are machines which cannot be mounted Neck thickness depending on the ATC specifications of the multi-taskmachine(HSK-A type), please check beforehand.HSK-T63Max.62 mmHSK-T100Max.99 mm Also be careful of interference of the magazine with adjacent tools. HSK-T turning tool standard (Example) Improved keyway tolerance Tolerance comparison (Example) (mm) Close tolerance 0.10 12.25 Key tolerance 12.35 HSK 0.15 Minimum clearance 0.08 A63 12.25 Keywaytolerance12.58 0.33 Maximum clearance 12.2 12.3 12.4 12.5 12.6 0.025 Spindle key 12.385 12.41 Holder keyway HSK Minimum clearance 0.015 T63 0.035 Maintains cutting edge height. Higher machining accuracy. 12.425 12.460.075 Maximum clearance H002 HSK-T TOOLS