Общий каталог Yamawa 2022 - 2023 - страница 702

⑦ Special Thread Taps / Simple Inspection Tools Overall length L ℓ Pin length Bored hole dia. Bored hole dia. Bored hole depth Bored hole depth Bored hole depth (GO) d1 (NOT-GO) d2 (1.5D) ℓ1 (2D) ℓ2 (2.5D) ℓ3 Shank dia. Ds JIS CPC-S Spiral Fluted Taps (for blind hole) ① JIS Check Pins for Bored Hole in Thread Cut Tapping (Straight Type) Spiral Fluted Taps (for through hole) ② Specification ■CPC-S consisting of 5 piece pins enables checking of several kinds of bored hole dia. and checking of depth of bored hole(for cutting taps, straight type). Spiral Pointed Taps (for through hole) CPC-S is made from wear resistant HSS material ③ and is applicable for both through hole and blind hole. ■* There are two types of five-pin set depending on the percentage of thread engagement: one set containing pins of 75% to 65% thread Hand Taps engagements and another containing pins of 100% ④ to 90% thread engagements. TYPE：1 Cemented Carbide Taps ⑤ Segment：7C Roll Taps L ℓ d1 d2 ℓ1 ℓ2 ℓ3 Ds ⑥ Size Code TYPE MSRP (mm) (mm) (Thread engagement ratio） (Thread engagement ratio） (mm) (mm) (mm) (mm) For Metric Threads M2 × 0.4 CPCS2.0EA 41.5 5.5 1.567 (100%) 1.610 (90%) 3 4 5 3 1 ¥2,320 □ M2 × 0.4 CPCS2.0EB 41.5 5.5 1.589 (95%) 1.632 (85%) 3 4 5 3 1 ¥2,320 □ Special Thread Taps Simple Inspection Tools M2 × 0.4 CPCS2.0EC 41.5 5.5 1.610 (90%) 1.654 (80%) 3 4 5 3 1 ¥2,320 □ ⑦ M2 × 0.4 CPCS2.0ED 41.5 5.5 1.632 (85%) 1.675 (75%) 3 4 5 3 1 ¥2,320 □ M2 × 0.4 CPCS2.0EE 41.5 5.5 1.654 (80%) 1.697 (70%) 3 4 5 3 1 ¥2,320 □ M2 × 0.4 CPCS2.0EF 41.5 5.5 1.675 (75%) 1.719 (65%) 3 4 5 3 1 ¥2,320 □ M2 × 0.4 CPCS2.0EM ＊５ piece set consists of CPCS2.0EB ～ CPCS2.0EF ¥11,600 □ Pipe Taps M2 × 0.4 CPCS2.0ES ＊５ piece set consists of CPCS2.0EA ～ CPCS2.0EE ¥11,600 □ ⑧ M2.5 × 0.45 CPCS2.5FA 45 7.5 2.013 (100%) 2.062 (90%) 3.75 5 6.25 3 1 ¥2,500 □ M2.5 × 0.45 CPCS2.5FB 45 7.5 2.037 (95%) 2.086 (85%) 3.75 5 6.25 3 1 ¥2,500 □ M2.5 × 0.45 CPCS2.5FC 45 7.5 2.062 (90%) 2.110 (80%) 3.75 5 6.25 3 1 ¥2,500 □ M2.5 × 0.45 CPCS2.5FD 45 7.5 2.086 (85%) 2.135 (75%) 3.75 5 6.25 3 1 ¥2,500 □ Thread Mills Premium Thread Mills ⑨ M2.5 × 0.45 CPCS2.5FE 45 7.5 2.110 (80%) 2.159 (70%) 3.75 5 6.25 3 1 ¥2,500 □ M2.5 × 0.45 CPCS2.5FF 45 7.5 2.135 (75%) 2.183 (65%) 3.75 5 6.25 3 1 ¥2,500 □ M2.5 × 0.45 CPCS2.5FM ＊５ piece set consists of CPCS2.5FB ～ CPCS2.5FF ¥12,500 □ M2.5 × 0.45 CPCS2.5FS ＊５ piece set consists of CPCS2.5FA ～ CPCS2.5FE ¥12,500 □ M2.5 × 0.35 ¥2,900 □ Dies CPCS2.5DA 45 7.5 2.121 (100%) 2.159 (90%) 3.75 5 6.25 3 1 ⑩ M2.5 × 0.35 CPCS2.5DB 45 7.5 2.140 (95%) 2.178 (85%) 3.75 5 6.25 3 1 ¥2,900 □ M2.5 × 0.35 CPCS2.5DC 45 7.5 2.159 (90%) 2.197 (80%) 3.75 5 6.25 3 1 ¥2,900 □ M2.5 × 0.35 CPCS2.5DD 45 7.5 2.178 (85%) 2.216 (75%) 3.75 5 6.25 3 1 ¥2,900 □ M2.5 × 0.35 CPCS2.5DE 45 7.5 2.197 (80%) 2.235 (70%) 3.75 5 6.25 3 1 ¥2,900 □ Center Drills Centering Tools M2.5 × 0.35 CPCS2.5DF 45 7.5 2.216 (75%) 2.254 (65%) 3.75 5 6.25 3 1 ¥2,900 □ ⑪ M2.5 × 0.35 CPCS2.5DM ＊５ piece set consists of CPCS2.5DB ～ CPCS2.5DF ¥14,500 □ M2.5 × 0.35 CPCS2.5DS ＊５ piece set consists of CPCS2.5DA ～ CPCS2.5DE ¥14,500 □ M3 × 0.5 CPCS3.0GA 49 9 2.459 (100%) 2.513 (90%) 4.5 6 7.5 4 1 ¥2,600 □ JIS ⑦-57 ※ = Specified Distribution Items. Made to order products. □=In stock at manufacturer.