Общий каталог Widia 2017 - страница 1033

Предыдущая страница Следующая страница

Навигация

ecommne arng ees [m]Lig Machiht ningGeneral PurposeHeavy Machining
0,90 Axia Insert Geometryl Depth of Cut (a 5%p) • HF16 10%Pro as agramme % of RadFeedp dial Dep 20%er Tooth th of Cut(fz) (ae)30%40–100%Insert Geometry
HF1,03 1,60 3,340,691,001,500,500,711,030,430,610,880,390,56 0,80HF

HF 1,03 1,60 3,34 0,69 1,00 1,50 0,50 0,71 1,03 0,43 0,61 0,88 0,39 0,56 0,80 HF

At 0,90 Axial Depth of Cut (ap) • HF17

Insert Geometry5%10%Prog as arammed Feed per Tooth % of Radial Depth of Cut 20%(fz) (ae)30%40–100%Insert Geometry
HF1,061,63 3,000,711,031,520,51 0,73 1,050,440,63 0,900,40 0,57 0,82HF

HF 1,06 1,63 3,00 0,71 1,03 1,52 0,51 0,73 1,05 0,44 0,63 0,90 0,40 0,57 0,82 HF

At 1,10 Axial Depth of Cut (ap) • HF20

Insert Geometry5%10%Prog as arammed Feed per Tooth % of Radial Depth of Cut 20%(fz) (ae)30%40–100%Insert Geometry
HF1,011,692,740,691,091,570,50 0,78 1,100,440,670,940,40 0,61 0,86HF

NOTE: Use “Light Machining” value as starting feed rate.