Каталог SGS микро инструмент 2021

Каталог SGS фрезы для алюминия S-carb

Каталог SGS монолитный инструмент из композитных материалов

Каталог SGS инструмент для обработки алюминия

Общий каталог SGS 2018

Общий каталог SGS 2021

Каталог SGS фрезы для труднообрабатываемых материалов Series 33

30° POS 15° 4

					LF
		AP	MX	LU
M4 • 3xD
							DCON		TOLERANCES(inch)
FRACTIONAL SERIES			DC	DN					.010–.120DIAMETER DC =+0000/–0001
• Four flute design allows				inch			EDP	NO.	.. DCON =h6
for higher feed rates and decreased deflection, improving productivity	CUTTING DIAMETER DC	SHANK DIAMETER DCON	LENGTH OF CUT APMX	REACH LU	NECK DIAMETER DN	OVERALL LENGTH LF	UNCOATED	TI-NAMITE-A (AlTiN)	STEELS
and surface finish.	0.010	1/8	0.030	0.080	0.009	1-1/2	09839	03454	STAINLESS STEELS
• Proprietary coating allows for superior chip	0.015	1/8	0.045	0.120	0.014	1-1/2	09841	03455
flow, driving industry	0.020	1/8	0.060	0.160	0.018	1-1/2	09843	03456	CAST IRON
leading productivity and value, even at low	0.025	1/8	0.075	0.200	0.023	1-1/2	09845	03457	HIGH TEMP ALLOYS
spindle speeds.	0.030	1/8	0.090	0.240	0.028	1-1/2	09847	03458	TITANIUM
• High performance carbide substrate	0.031	1/8	0.093	0.248	0.029	1-1/2	09849	03459	HARDENED STEELS
designed specifically for	0.035	1/8	0.105	0.280	0.032	1-1/2	09851	03460
Micro Tool applications. • Bd tfli ffi	0.040	1/8	0.120	0.320	0.037	1-1/2	09853	03461	NON-FERROUS
roa poroo, oerng consistent lengths of cut,	0.045	1/8	0.135	0.360	0.042	2	09855	03462	PLASTICS/COMPOSITES
to ensure application demands are met	0.047	1/8	0.141	0.376	0.044	2	09857	03463
. • Advanced geometries	0.050	1/8	0.150	0.400	0.047	2	09859	03464
that extend tool life,	0.055	1/8	0.165	0.440	0.051	2	09861	03465
reduce chatter, cut cycle times, and improve part	0.060	1/8	0.180	0.480	0.056	2	09863	03466
quality.	0.062	1/8	0.186	0.496	0.058	2	09865	03467
• All tools in stock to meet customer order	0.065	1/8	0.195	0.520	0.061	2	09867	03468
requirements.	0.070	1/8	0.210	0.560	0.065	2	09869	03469
• All micro tools are f	0.075	1/8	0.225	0.600	0.070	2	09871	03470
manuactured in accordance with the	0.078	1/8	0.234	0.624	0.073	2	09873	03471
KSPT ISO certified lit d	0.080	1/8	0.240	0.640	0.075	2	09875	03472
quay proceures.	0.085	1/8	0.255	0.680	0.079	2	09877	03473
	0.090	1/8	0.270	0.720	0.084	2	09879	03474
	0.093	1/8	0.279	0.744	0.087	2	09881	03475
	0.095	1/8	0.285	0.760	0.089	2	09883	03476
	0.100	1/8	0.300	0.800	0.094	2	09885	03477
	0.110	1/8	0.330	0.880	0.103	2	09887	03478
	0.115	1/8	0.345	0.920	0.108	2	09889	03479
	0.120	1/8	0.360	0.960	0.112	2	09891	03480

Каталог SGS микро инструмент 2021 - страница 70

Навигация

Каталог SGS микро инструмент 2021 - страница 70

Навигация

Отправьте заявку

На подбор необходимой оснастки и оборудования