Основной каталог Kyocera 2021 - 2022 - страница 906

Предыдущая страница Следующая страница

Навигация

Lead angle 0°/ 2° MEAS KCGT Usage classification: ★：Roughing / 1st Choice Non-ferrous metals ★ N Dimension (mm) Carbide Applicable Insert Description DLC S D1 RE L W1 toolholder PDL025 KCGT 130504FR-AL 0.4 14.1 N 130508FR-AL 0.8 13.9 N RE 130512FR-AL 1.2 13.8 N D1 L 130516FR-AL 1.6 13.3 N 130520FR-AL 2 13.3 N 5.1 4.4 9.9 M134, M135 W1 S 130524FR-AL 2.4 13.3 N 130530FR-AL 3 13.3 N 130532FR-AL 3.2 12.8 N Non-Ferrous Metals 130540FR-AL 4 12.8 N 130550FR-AL 5 12.8 N Handed insert shows Right-hand MEAS 0 DC -0.2 0 DC -0.2 DCONh6 DCONh6 APMX APMX LH LH LF LF Fig. 1 Fig. 2 Recommended cutting conditions MEAS Cutti ø50 (4 flutes) Sh Workpiece Vc fz Property material (m/min) (mm/t) 12 Toolholder dimensions Si Ratio 200~1,000~3,000 0.05~0.15~0.25 10 Aluminum 12.5% or less alloys Si Ratio 200~300~400 0.05~0.1~0.2 12.5% and over 8 Spare parts M ap（mm） Availa- • Recommended cutting conditions are reference values. Please adjust Dimension (mm) 6 bility Max. Anti-seize cutting speed and feed rate according to actual machining conditions taking into accountcompound Screw machine and workpiece rigidity Wrench Coolant revolu- Weight• Do not use the cutter 4 at speeds exceeding the maximum Description Inserts A.R. R.R. Fig. hole tion (kg) • Regularly cutting speed limit changing the insert clamp screw is recommended 2 R DC DCON LF LH APMX (min -1 ) Use appropriate safety covers to protect from tool breakage and chip scattering 0 • When using at a higher revolution (10,000min-1 or over), refer to Milling the table below to adjust the balance of the MEAS and arbor Reduce the feed MEAS 28-S25-13-2T N 28 25 125 40 54000 0.4 1 Standard 2 -13 ISO balance quality grade shank Revolution 35-S32-13-2T N +10 35 12 Yes 46000 1 (min-1) ISOP-37 1940-1/8821 SB-4090TRP DTPM-15 32 150 50 0.9 (JIS B0905) 40-S32-13-3T N 3 -12 40 42000 ~20,000 1 G16 Case studie ~30,000 G6.3 MEAS 25-S25-13-2T N -14 25 25 125 49 59000 0.4 30,000~ 2 SB-4075TRP shank Same 2 +10 12 Yes P-37G2.5 DTPM-15 Industrial Machin 32-S32-13-2T N -13 32 32 150 69 49000 0.8 2 SB-4090TRP Vc = 1,500 m/min (n = 9,55 1. ap x ae = 3 x 40mm MEAS 25-S25-13-2T-170 N -14 25 25 170 89 49000 0.5 Max. revolution 2 for each cutting diameterSB-4075TRP shank fz = 0.2mm/t (Vf = 7,64 Long 2 +10 12 Yes P-37 DTPM-15 2. ap x ae = 8 x 5mm 32-S32-13-2T-200 N -13 32 32 200 119 39000 1.1 Cutting dia.2 Max. revolution SB-4090TRP fz = 0.2mm/t (Vf = 7,64 3. ap x ae = 2 x ~ 50mm øD (mm) n (min-1) fz = 0.15mm/t (Vf = 5,7 When using inserts with a corner-R(RE) of 3.2 or larger, additional modifications (R3.5 mm or larger) on the corner of cutter body is necessary. ø25 59,000 Wet MEAS050R-13-4T-M (Long shank: 49,000) Coat Anti-seize Compound thinly on portion of taper and thread when insert is fixed. ø28 54,000 KCGT130504FR-AL PDL02 ø32 49,000 Cutting time 46,000 MEAS ø50-4T ø35 (Long shank: 39,000) ø40 42,000 Competitor C ø 50-3T ø50 36,000 MEAS showed 50% faster c N : Standard item R : Right hand only L : Left hand only U : Check availability Recommended cutting conditions: M135 M134