Основной каталог Winstar 2021 - страница 274

Предыдущая страница Следующая страница

Навигация

Solid Carbide Endmills Recommended Cutting Conditions Table 077 A100 Seires ENSSB3 WORKING ALLUMINUM ALLOY MATERIAL Application Shoulder Milling Slot Milling Vc 200 ~400 m/min 150 ~ 300 m/min fz ap ae fz ap DIAMETER (mm/z) (mm) (mm) (mm/z) (mm) 4mm 0.0200 ≤ 1.5×d ≤ 0.3×d 0.030 ≤ 1×d 5mm 0.0250 ≤ 1.5×d ≤ 0.3×d 0.040 ≤ 1×d 6mm 0.0350 ≤ 1.5×d ≤ 0.3×d 0.057 ≤ 1×d 8mm 0.0450 ≤ 1.5×d ≤ 0.3×d 0.075 ≤ 1×d 10mm 0.0570 ≤ 1.5×d ≤ 0.3×d 0.096 ≤ 1×d 12mm 0.0670 ≤ 1.5×d ≤ 0.3×d 0.110 ≤ 1×d 16mm 0.0880 ≤ 1.5×d ≤ 0.3×d 0.145 ≤ 1×d 20mm 0.1200 ≤ 1.5×d ≤ 0.3×d 0.180 ≤ 1×d 1.Use as highly rigid and accurate machine as possible. 2.If the rpm available is lower than the recommend condition, please reduce the feed rate to the same ratio. 3.Use long shank type please reduce the rpm and feed rate. 4.The Feed and RPM may be changed depending on the M/C conditions ,lubricating and cooling system. A269