Основной каталог Winstar 2021 - страница 220
Навигация
Каталог Carbidex сменные пластины 2020
Каталог Winstar твердосплавные пластины и вставки
Брошюра Winstar пластины 2021
Каталог Winstar монолитный инструмент 2020
Каталог Winstar инструмент со сменными пластинами 2020- Cover
- A-Milling
- Solid Carbide Endmills
- H700
- H680
- H650
- H600
- G550
- V470
- G450
- V530
- V520
- M500
- Hypex
- A300
- A200
- A100
- CuttingData
- Milling Inserts
- Indexable Milling Cutters
- Shoulder Milling Cutters
- Face Milling Cutters
- Copy Milling Cutters
- Chamgering & Engraving Cutters
- Helical Milling Cutters
- Disc Milling Cutters
- Modular Milling Tools
- B-Holemaking
- Solid Carbide Drills
- DPC&DPN
- DLC&DLN
- DMC&DMN
- DHN
- DFN
- DZC&DZN
- DAN
- DGN
- CuttingData
- Modular Drills
- Indexable Drills
- Spotting & Centering Drills
- Solid Carbide Reamers
- Indexable Boring Tools
- C-Turning
- ISO Turning Inserts
- Turning Holders
- Parting & Grooving Tools
- Mini Turning Tools for Auto Lathe
- D-Threading
- Solid Thread Mills
- Solid Thread Turning Bars
- Indexable Thread Turning Tools
- E-Customized & Tooling
Table 014
H650 Seires EHCSH4
| Material | PR | EHARDEN NAK80 C | ED STEE ENA1 | LS | HARDENED SKD61,S | STEELS KD11 | Hardene SKD11,S | d Steel KH51 | ||||
| Hardness | HRC 3 | 5~45 | HRC 4 | 0~55 | HRC 5 | 5~65 | ||||||
| Vc | 145 (m | /min) | 125 (m | /min) | 105 (m | /min) | ||||||
| Dia | RPM | Feed (mm/min) | ap (mm) | ae (mm) | RPM | Feed (mm/min) | ap (mm) | ae (mm) | RPM | Feed (mm/min) | ap (mm) | ae (mm) |
| 3mm | 15390 | 1415 | 3 | 0.15 | 13270 | 1220 | 3 | 0.15 | 11150 | 1025 | 3 | 0.15 |
| 4mm | 11550 | 1386 | 4 | 0.2 | 9950 | 1194 | 4 | 0.2 | 8360 | 1003 | 4 | 0.2 |
| 6mm | 7700 | 1232 | 6 | 0.3 | 6630 | 1060 | 6 | 0.3 | 5570 | 891 | 6 | 0.3 |
| 8mm | 5770 | 923 | 8 | 0.4 | 4980 | 796 | 8 | 0.4 | 4180 | 668 | 8 | 0.4 |
| 10mm | 4620 | 924 | 10 | 0.5 | 3980 | 796 | 10 | 0.5 | 3345 | 669 | 10 | 0.5 |
| 12mm | 3850 | 770 | 12 | 0.6 | 3320 | 664 | 12 | 0.6 | 2790 | 558 | 12 | 0.6 |
Table 015
H650 Seires EHCLH4
| Material | PR | EHARDEN NAK80 | ED STEE CENA1 | LS | HARDENE SKD61, | D STEEL SKD11 | S | Hardene SKD11, | d Steel SKH51 | |||
| Hardness | HRC 3 | 5~45 | HRC 4 | 0~55 | HRC 5 | 5~65 | ||||||
| Vc | 123 (m | /min) | 106 (m | /min) | 89 (m | /min) | ||||||
| Dia | RPM | Feed (mm/min) | ap (mm) | ae (mm) | RPM | Feed (mm/min) | ap (mm) | ae (mm) | RPM | Feed (mm/min) | ap (mm) | ae (mm) |
| 3mm | 13080 | 1200 | 3 | 0.15 | 11280 | 1038 | 3 | 0.15 | 9480 | 871 | 3 | 0.15 |
| 4mm | 9820 | 1178 | 4 | 0.2 | 8460 | 1015 | 4 | 0.2 | 7100 | 852 | 4 | 0.2 |
| 6mm | 6545 | 1050 | 6 | 0.3 | 5635 | 900 | 6 | 0.3 | 4740 | 757 | 6 | 0.3 |
| 8mm | 4905 | 785 | 8 | 0.4 | 4235 | 676 | 8 | 0.4 | 3555 | 568 | 8 | 0.4 |
| 10mm | 3927 | 785 | 10 | 0.5 | 3385 | 676 | 10 | 0.5 | 2845 | 568 | 10 | 0.5 |
| 12mm | 3270 | 655 | 12 | 0.6 | 2820 | 564 | 12 | 0.6 | 2370 | 474 | 12 | 0.6 |
1.Use as highly rigid and accurate machine as possible. 2.If the rpm available is lower than the recommend condition, please reduce the feed rate to the same ratio. 3.Use long shank type please reduce the rpm and feed rate. 4.The Feed and RPM may be changed depending on the M/C conditions ,lubricating and cooling system.