Каталог Winstar монолитный инструмент 2020 - страница 218

Solid Carbide Endmills Recommended Cutting Conditions ら峿⎖⏙╒㜇 Table 016 H650 Seires EHBSH2 Material PREHARDENED STEELS HARDENED STEELS Hardened Steel ⽴₅㣟㜨 屎幹撋NAK80 CENA1! 㽻䇺撋SKD61,SKD11 㽻䇺撋SKD11,SKH51 Hardness 䧻〵 HRC 35~45 HRC 40~55 HRC 55~65 VC 佩憮〵 145 (m/min) 125 (m/min) 105 (m/min) Dia ) ⎒ㄠ * RPM 惘憮 Feed (mm/min)懁仵 ap(mm) ae RPM Feed (mm/min) ap(mm)惘憮懁仵(mm)ae RPM Feed (mm/min) ap(mm)惘憮懁仵(mm)ae(mm) 1R 45270 1130 0.14 0.2 39030 975 0.14 0.2 32780 820 0.14 0.2 2R 22636 1358 0.28 0.4 19500 1170 0.28 0.4 16400 984 0.28 0.4 3R 15090 1130 0.42 0.6 13000 975 0.42 0.6 10930 820 0.42 0.6 4R 11320 905 0.56 0.8 9750 780 0.56 0.8 8195 655 0.56 0.8 5R 9055 770 0.7 1 7800 663 0.7 1 6555 557 0.7 1 6R 7545 680 0.84 1.2 6500 585 0.84 1.2 5460 491 0.84 1.2 1.Use as highly rigid and accurate machine as possible. 2.If the rpm available is lower than the recommend condition, please reduce the feed rate to the same ratio. 3.Use long shank type please reduce the rpm and feed rate. 4.The Feed and RPM may be changed depending on the M/C conditions ,lubricating and cooling system. 2/ 䡰╾劌䚷汧⏪ㆶҷ汧乍㯮〙Ҹ 3/ 㯮〙惘憮ᾜ彂㟑虇屚ⶖ懁仵ҷ惘憮▛㵣ℚᾚ屎Ҹ 4/ 朆㥓⤚㎥⇞㚉懝⪶㟑屚嬥㉔㹐ᾚ屎惘憮ҷ懁仵Ҹ 5/ ⁴ᾙ㜇㙩䉉ら峿⇋虇懸䜅䠓㨬₅⁜榗嬥㯮╿䑏㹐ҷ⫍㹊⌆♐幹ҷ䃳䁠⍆┊亊伀ʫ䳘㛈崙Ҹ SA208