Общий каталог Widia 2017 - страница 723

M Max depth of cut: 3,5mm M

Max depth of cut: 1,7mm K K Lead angle: 15° Lead angle: 45° N N

Indexes per insert: 12 Indexes per insert: 12 S S Diameter: 25–80mm Diameter: 25–120mm H Pages: H5–H11 Pages: H12–H19

Victory™ M1200 Mini HD 59° Max depth of cut: 4,7mm

Lead angle: 59° Indexes per insert: 12 Diameter: 40–125mm

Pages: H20–H23

P M K N S

„ Easy-to-use wiper insert setup to achieve excellent surface fl oor fi nish

Wiper insert overlapping vs.

regular insert

Regular Insert HNGJ07

Wiper Insert XNGJ07

[D1] 1,22mm [D1 max] D1 max wiper = D1 max + 2,44mm

• Wiper inserts only applied with 45° lead angle
• Up to cutting diameter D1=100mm load one

cutter bodies. wiper insert.

• Easy to use. Regular and wiper inserts are loaded
• For cutting diameter D1=125mm and above

into fi xed pockets. No adjustment required. load two wiper inserts.

• Please have D1 max wiper in mind in case of limited
• Each wiper insert XNGJ07 can be applied with three

working area. right hand R and three left hand L cutting edges.

• Use wiper inserts only in combination with periphery ground regular inserts HNGJ07.