Общий каталог Widia 2017 - страница 576

Separator™ Inserts

Feed Values for Grooving

Separator • X2 and X2-Ultra

This insert has the same geometry as the WMT-SX™. Chip

control geometry offers the widest range of speed and feed

capabilities and provides excellent fl atness and fi nish. This

chipbreaker cuts with the least amount of tool pressure,

extending tool life. The geometry also includes wipers and

a corner radius. This geometry works well on a variety of

X2 materials.

This insert has the same geometry as the WMT-SX-Ultra. The

2 2

X -Ultra is an enhanced version of the X and is ideal for stainless

steels, nickel-based alloys, tool steel, INCONEL®, and titanium.

X2-Ultra

0,30

0,25

0,20

0,15

0,10

0,05

2,0 2,5 3,0

width of cut [mm] 1 Recommended Starting Feed

Separator • S2 and S2-Ultra

High positive rake with a more open chipbreaker enables

increased speeds and feeds for moderate- to high-speed

applications. The geometry includes wipers and a corner

radius that provides superior fl atness and fi nish. This insert

is also available with sharp corners. Its greatest strengths

can be seen on stainless steels and soft gummy steels. S2

The S2-Ultra is an enhanced version of the S2 and is ideal

for 300 series stainless steels, nickel-based alloys, tool steel, INCONEL, and titanium at moderate to high speeds and feeds.

S2-Ultra

0,30

0,25

0,20

0,15

0,10

0,05

2,5 3,0 4,0

width of cut [mm] 1 Recommended Starting Feed

Separator • Classic and F2

A good general-purpose insert for carbon steels, alloy steels,

and most stainless steels. The Separator Classic chipbreaker

is designed to perform well at moderate to slow speeds and

feeds. The Classic provides standard high lead angles and sharp

corners, making it the fi rst choice when choosing an insert for

nib-free cut-off. Classic

This insert provides superior fl atness and fi nish on a wide variety

of materials Ideal for thick wall parts or cutting off larger diameter

parts to centre. The Separator F2 performs well at slow to

moderate speeds and feeds. F2

0,30

0,25

0,20

0,15

0,10

0,05

1,5 2,5 3,2 4,0 4,8

width of cut [mm] 1 Recommended Starting Feed