Каталог Tungaloy инструмент для автоматов швейцарского типа - страница 287
Навигация
Общий каталог Tungaloy 2020 - 2021
Каталог Tungaloy глубокое сверление 2
Каталог Tungaloy зубофрезерование
Брошюра Tungaloy новая продукция
Каталог Tungaloy глубокое сверление 1
TID L/D=1.5 1
| DC | LU | OAL | LS | DCSFMS DCONMSh6 | ||||||
| Designation | DC | DCONMS | DCSFMS | LU | LS | DMP/DMH | OAL DMC | DMF | Pocket size | Head |
| TID060F12-1.5 | 6 - 6.4 | 12 | 16 | 10 | 45 | 68 | 68.2 | - | 6 | DM060 - DM064 |
| TID065F12-1.5 | 6.5 - 6.9 | 12 | 16 | 11 | 45 | 69.1 | 69.6 | - | 6 | DM065 - DM069 |
| TID070F12-1.5 | 7 - 7.4 | 12 | 16 | 12 | 45 | 70.1 | 70.3 | - | 7 | DM070 - DM074 |
| TID075F12-1.5 | 7.5 - 7.9 | 12 | 16 | 13 | 45 | 70.9 | 71.1 | - | 7 | DM075 - DM079 |
| TID080F12-1.5 | 8 - 8.9 | 12 | 16 | 14 | 45 | 72.4 | 73 | - | 8 | DM080 - DM089 |
| TID090F12-1.5 | 9 - 9.9 | 12 | 16 | 16 | 45 | 74.3 | 74.9 | - | 9 | DM090 - DM099 |
| TID100F16-1.5 | 10 - 10.9 | 16 | 20 | 17 | 48 | 79.2 | 79.8 | 77.8 | 10 | DM100 - DM109 |
| TID110F16-1.5 | 11 - 11.9 | 16 | 20 | 19 | 48 | 81.1 | 81.7 | 79.5 | 11 | DM110 - DM119 |
| TID120F16-1.5 | 12 - 12.9 | 16 | 20 | 20 | 48 | 83 | 83.6 | 81.4 | 12 | DM120 - DM129 |
| TID130F16-1.5 | 13 - 13.9 | 16 | 20 | 22 | 48 | 85.1 | 85.9 | 83.2 | 13 | DM130 - DM139 |
| TID140F16-1.5 | 14 - 14.9 | 16 | 20 | 24 | 48 | 89.1 | 89.9 | 87.1 | 14 | DM140 - DM149 |
| TID150F20-1.5 | 15 - 15.9 | 20 | 25 | 26 | 50 | 96.2 | 97.1 | 94.1 | 15 | DM150 - DM159 |
| TID160F20-1.5 | 16 - 16.9 | 20 | 25 | 27 | 50 | 99.3 | 100.3 | 97 | 16 | DM160 - DM169 |
| TID170F20-1.5 | 17 - 17.9 | 20 | 25 | 29 | 50 | 102.4 | 103.4 | 99.9 | 17 | DM170 - DM179 |
| TID180F25-1.5 | 18 - 18.9 | 25 | 32 | 30 | 56 | 111.5 | 112.6 | 108.7 | 18 | DM180 - DM189 |
| TID190F25-1.5 | 19 - 19.9 | 25 | 32 | 33 | 56 | 114.5 | 115.6 | 111.5 | 19 | DM190 - DM199 |
| TID200F25-1.5 | 20 - 20.9 | 25 | 32 | 34 | 56 | 117.6 | 118.8 | - | 20 | DM200 - DM209 |
| TID210F25-1.5 | 21 - 21.9 | 25 | 32 | 36 | 56 | 120.7 | 121.9 | - | 21 | DM210 - DM219 |
| TID220F25-1.5 | 22 - 22.9 | 25 | 32 | 37 | 56 | 123.8 | 125.1 | - | 22 | DM220 - DM229 |
2
Tool diameter Hole diameter An overall length (OAL) differs for when the DMP/DMH insert are mounted and when the DMC/DMF are mounted.
tolerance* (No difference for the drill shoulder) ø6 - ø22.9 +0.05 / 0 *Just for reference
| Designation | Clamping key |
| TID060-090 | K-TID6-9.99 |
| TID100-190 | K-TID10-19.99 |
| TID200-220 | K-TID20-26.99 |