Каталог Tungaloy инструмент для автоматов швейцарского типа - страница 265
Навигация
Общий каталог Tungaloy 2020 - 2021
Каталог Tungaloy глубокое сверление 2
Каталог Tungaloy зубофрезерование
Брошюра Tungaloy новая продукция
Каталог Tungaloy глубокое сверление 1
| Cutting speed | Feed rate: | f (mm/rev) | |||
| ISO | Workiece material | Grade | |||
| p | Vc (m/min) | GMR… | GR/L… | ||
| AH7025 | 80 - 180 | 0.03 - 0.12 | - | ||
| Carbon steel S45C, C45, etc. | NS9530 | 80 - 200 | - | 0.05 - 0.15 | |
| UX30 | 40 - 150 | - | 0.05 - 0.15 | ||
| AH7025 | 80 - 180 | 0.03 - 0.12 | - | ||
| Alloy steel SCM435, 34CrMo4, etc. | NS9530 | 80 - 200 | - | 0.05 - 0.15 | |
| UX30 | 40 - 150 | - | 0.05 - 0.15 | ||
| Stainless steel | AH7025 | 50 - 120 | 0.03 - 0.12 | - | |
| SUS304, X5CrNi18-9, etc. | UX30 | 40 - 100 | - | 0.03 - 0.1 | |
| Titanium alloys | AH7025 | 30 - 80 | 0.03 - 0.12 | - | |
| Ti-6AI-4V, etc. | TH10 | 20 - 50 | - | 0.05 - 0.08 | |
| Superalloys | AH7025 | 20 - 60 | 0.03 - 0.12 | - | |
| Inconel718, etc. | TH10 | 10 - 30 | - | 0.03 - 0.08 |
- Optimized chip former
removes chips out of
the groove
- Forms 10° rake angle
when set on the holder
**GMR... **GR/L...
For excellent chip control Universal geometry
| Groove widths | : CW = 1.5 - 3 mm | Groove widths : CW = 1 - 5 mm | |
| Corner radius | : RE = 0.15 - 0.2 mm | Corner radius | : RE = 0.2 mm |