Каталог Tungaloy инструмент для автоматов швейцарского типа - страница 220
Навигация
Общий каталог Tungaloy 2020 - 2021
Каталог Tungaloy глубокое сверление 2
Каталог Tungaloy зубофрезерование
Брошюра Tungaloy новая продукция
Каталог Tungaloy глубокое сверление 1
CGER/L
E x te r n a l d e e p g ro o v i n g a n d p a r t i n g to o l h o l d e r, f o r S w i s s l a t h e s
CDX
LF
CUTDIA LH
Right hand (R) shown.
| Designation | CW | Seat size CUTDIA(1) | CDX | H | B | LF | LH | HF | WF (2) | HBH | |||
| CGER/L2020-1.4T14 | 1.4 | 1 | 29/29 | 9.7 | 20 | 20 | 125 | 31 | 20 | 20.2 | - | ||
| CGER/L1212-2T17 | 2 | 2 | 35/35 | 11.8 | 12 | 12 | 150 | 31 | 12 | 12.1 | 6 | ||
| CGER/L1616-2T17 | 2 | 2 | 35/35 | 11.8 | 16 | 16 | 150 | 31 | 16 | 16.1 | 2 |
External
| CGER/L2020-2T17 | 2 | 2 | 35/35 | 9.8 | 20 | 20 | 125 | 31 | 20 | 20.1 | - |
| CGER/L1212-3T19 | 3 | 3 | 38/40 | 12 | 12 | 12 | 150 | 31 | 12 | 12.3 | 6 |
| CGER/L1616-3T19 | 3 | 3 | 38/45 | 14.9 | 16 | 16 | 150 | 31 | 16 | 16.3 | 2 |
Internal
| CGER/L2020-3T19 | 3 | 3 | 38/45 | 13.2 | 20 | 20 | 125 | 31 | 20 | 20.3 | - |
| CGER/L2020-4T19 | 4 | 4 | 38/55 | 20.3 | 20 | 20 | 125 | 33 | 20 | 20.4 | - |
Wrench (CRW**) is not included. Please order it separately. Insert is clamped by the elastic deformation of the upper jaw. Face (1) DG*/SG* maximum parting diameter will depend on the insert. (2) "WF" value is calculated with groove width "CW" shown in the table.
SPARE PARTS
Parting Designation Wrench (Option)
CGER/L2020-1.4T14 CRW23 CGER/L****-2T17 - 4T19 CRW33
CTER/L-CHP
M o n o - b l o c k e x t e r n a l g r o o v i n g a n d p a r t i n g t o o l h o l d e r , w i t h h i g h p r e s s u r e c o o l a n t c a p a b i l i t y
G1/8" BSPP
CDX
LF
LH
G1/8" BSPP HBH Right hand (R) shown.
| Designation | CW | Seat size | CDX | H | B | LF | LH | HF | WF | HBH | Torque* | |||
| CTER/L2020-2T17-CHP | 2 | 2 | 17 | 20 | 20 | 125 | 45 | 20 | 19.1 | 4 | 5.5 | |||
| CTER/L2020-3T20-CHP | 3 | 3 | 20 | 20 | 20 | 125 | 48 | 20 | 18.8 | 4 | 5.5 |
When groove depth is larger than (insert length - 1.5 mm), please use 1-cornered insert. *Torque: Recommended clamping torque (N∙m)
SPARE PARTS
| Designation | Clamping screw | Wrench | |
| CTER/L2020-2T17-CHP | CM5x0.8x20-A | P-4 | |
| CTER/L2020-3T20-CHP | CM5x0.8x20-A | P-4 |