Insert sizeInsert size TPITPI Hand of cutHand of cut 4.76 6.41 PDY INSERT BSPT (for Pipe) Applicable toolholder RE PDX PDX Insert size External InternalRE6SNR/L000*K06SC... 55° SNR/L000*H06... 11 SER**11... SNR/L**11... 16 CER/L**16... TSNR/L**16 JSER**16 SNR/L**16... Threadform 1°47’ 5.56 ICRight hand (R) for internal threadingRight hand (R) for externalthreadingJSE**SEL16TCNR/L**16...B-SER/L**16CNR/L**16...B-CER/L**16BC-SER/L**16 60º Full-profile insert External insert Internal insert M Pitch Grade Grade (Metric) (Reference) Designation Coated Uncoated IC PDX PDY RE Designation Coated Uncoated IC PDX PDY RE AH725 T313V TH10 AH725 T313V TH10 55º 6 (1.337) 19 R 6IR19PT 䖃 䖃 - 0.9 - 0.14 UN 11 (1.337) 19 R(Unified)11(1.814)14R 11IR19PT 䖃 䖃 䖃 6.35 0.9 0.7 0.1411IR14PT䖃䖃䖃6.350.90.70.16 W 16 (0.907) 28 R 16ER28PT(Whitworth)16(1.337)19R16ER19PT䖃䖃䖃䖃 9.525 0.9 0.7 0.099.5250.90.70.1416IR19PT 䖃 9.525 0.9 0.7 0.14 BSPT 16 (1.814) 14 R 16ER14PT(R, PT)16(2.309)11R16ER11PT䖃䖃䖃䖃 9.525 1.6 1.2 0.16 16IR14PT9.5251.61.20.2616IR11PT 䖃 䖃 䖃 9.525 1.6 1.2 0.16䖃䖃䖃9.5251.61.20.26 Full-profile insert with chipbreaker External insert Internal insert Pitch Grade Grade (Reference) Designation Coated Cermet IC PDX PDY RE Designation Coated Cermet IC PDX PDY RE AH725 NS9530 AH725 NS9530 16 (1.337) 19 R 16ER19PT-M 䖃 9.525 0.9 0.7 0.18 16IR19PT-M 䖃 9.525 0.9 0.7 0.18 16 (1.814) 14 R 16ER14PT-B 䖃* 9.525 1.2 1 0.21 16IR14PT-B 䖃* 9.525 1 1.2 0.21 16 (1.814) 14 R 16ER14PT-M 䖃 9.525 1.6 1.2 0.25 16IR14PT-M 䖃 9.525 1.6 1.2 0.25 16 (2.309) 11 R 16ER11PT-B 䖃* 9.525 1.5 1.1 0.28 16IR11PT-B 䖃* 9.525 1.5 1.1 0.28 16 (2.309) 11 R 16ER11PT-M 䖃 9.525 1.6 1.2 0.32 16IR11PT-M 䖃 9.525 1.6 1.2 0.32 The adjustment of the cutting edge position w i l l be needed as the dimensions of PDX and PDY are different from other inserts. highlighted item requires changing shims. When using a new AH725 with chipbreaker, the conventional shim may need to be replaced with a new standard shim. Please refer to the page 5-27. AH725Insert Conventional shim Toolholder Inappropriate example Reference pages: Toolholders → 5-20 - 5-24, Standard cutting conditions → 5-25 䖃 : Line up / 5 pieces per package 5-14