Каталог Tungaloy инструмент для автоматов швейцарского типа - страница 169

Предыдущая страница Следующая страница

Навигация

A/E-SDXXR/L 1

S c re w - o n boring b a r, for DXG U inserts

DMIN H

100°

15.5˚

GAMFLH2
LF
GAMP
Cutting edge style X
Right hand (R) shown.
Designation MaterialDMIN DCONMS WFLFLHHf2GAMP GAMF RE**Torque* Insert
A10K-SDXXR/L07-D130Steel13107.61252092.6-14°-16°0.4DXGU0703**L/R...0.9
A12M-SDXXR/L07-D160Steel16128.615024112.6-14°-14°0.4DXGU0703**L/R...0.9
A16Q-SDXXR/L07-D200Steel201610.618032152.6-13°-13°0.4DXGU0703**L/R...3 0.9
E10M-SDXXR/L07-D130Carbide13107.61502592.6-14°-16°0.4DXGU0703**L/R...0.9
E12Q-SDXXR/L07-D160Carbide16128.618027112.6-14°-14°0.4DXGU0703**L/R...0.9
*Torque: Recommended clamping torque (N∙m) **RE : Standard corner radius
SPARE PARTSUse right-hand toolholders (R) with left-hand inserts (L); and left-hand toolholders (L) with right-hand
inserts (R)
DesignationClamping screwWrench
A/E**-SDXXR/L...SR34-514T-7F4

A/E-SDZXR/L S c re w - o n boring b a r, for DXG U inserts DMIN H LH 5

93°

26˚

GAMFL3LF
GAMP
Cutting edge style Z
Right hand (R) shown.
Designation MaterialDMIN DCONMS WFLFLHL3Hf2 GAMP GAMF RE**6 Torque* Insert
A12M-SDZXR/L07-D140Steel141210.51503013114.5-10°-14°0.4DXGU0703**R/L...0.9
A16Q-SDZXR/L07-D160Steel161612.51803513154.5-10° -12.5°0.4DXGU0703**R/L...0.9
E12Q-SDZXR/L07-D180Carbide181210.5180-13114.5-11°-11°0.4DXGU0703**R/L...0.9
*Torque: Recommended clamping torque (N∙m) **RE : Standard corner radius
SPARE PARTSUse right-hand toolholders (R) with right-hand inserts (R); and left-hand toolholders (L) with left-hand
inserts (L).
DesignationClamping screwWrench
A/E**-SDZXR/L...SR34-514T-7F7
INSERT SELECTION
Swiss lathes
ApplicationFinishingMedium cuttingApplicationFinishingMedium cutting
GradeSH725AH725 GradeSH725AH725
JSSJTSJSSJTS
BreakerBreaker8
ShapeShape
Small CNC lathes
ApplicationFinishingMedium cuttingApplicationFinishingMedium cutting
GradeAH725AH725 GradeAH8015AH8015
SSTSSSTS
BreakerBreaker
ShapeShape9

Reference pages: A/E-SDXXR/L, A/E-SDZXR/L: Insert → 2-20 Standard cutting conditions → 4-32, Sleeve → 4-31