Каталог Tungaloy инструмент для автоматов швейцарского типа - страница 123

Предыдущая страница Следующая страница

Навигация

PTL2NR/L 1

Le v e r- l o c k toolholder with 9 5 ° approach a n g l e , for negative 6 0 ° triangular inserts

45° Without offset

LH

LF 2

95°

Cutting edge style L2

Right hand (R) shown.

DesignationHBLFLHHFWFRE**Torque* Insert
PTL2NR/L2020H1620201002220200.42 TN**1604...
*Torque: Recommended clamping torque (N∙m)
**RE: Standard corner radius3
SPARE PARTS
DesignationShimClamping screwWrenchSpring pinLever
PTL2NR/L...LST317 D30LCS3P-2.5LSP3LCL3

JTTLNR/L 4 B a c k - c l a m p toolholder with 9 5 ° approach a n g l e , for negative 6 0 ° triangular inserts Without offset 115°

LH

95°LF5
Cutting edge style L
Right hand (R) shown.
DesignationHBLFLHHFWFRE**InsertTorque*
JTTLNR/L1216F161216851712160.4TN**1604...1.2
JTTLNR/L1216X1612161201712160.4TN**1604...1.2
JTTLNR/L1616X1616161201716160.4TN**1604...6 1.2
*Torque: Recommended clamping torque (N∙m)
SPARE PARTS**RE: Standard corner radius
DesignationClampClamping screwWrench
JTTLNR/L...JCP-3NJDS-5040P-2.5F

JTTANR/L 7 B a c k - c l a m p toolholder with 9 1 ° approach a n g l e , for negative 6 0 ° triangular inserts Without offset LH

LF

91° 8

Cutting edge style A

Right hand (R) shown.

DesignationHBLFLHHFWFRE**InsertTorque*
JTTANR/L1216K16121612519.812160.4TN**1604...1.2
JTTANR/L1616K16161612519.816160.4TN**1604...1.2
*Torque: Recommended clamping torque (N∙m)

SPARE PARTS **RE: Standard corner radius 9

DesignationClampClamping screwWrench
JTTANR/L...JCP-3NJDS-5040P-2.5F

Reference pages: PTL2NR/L, JTTLNR/L, JTTANR/L: Inserts → 2-49 -