JPVJ2XR/L 1
Le v e r- l o c k toolholder with 9 3 ° approach a n g l e , for VXGU inserts
| 93° 50° Cutting edge styleJ2 | | | | HF LH WF | LF | B H | Right h With | and (R) shown. out offset |
| H Designation | B | LF | LH | HF | WF | RE | Insert | Torque |
| JPVJ2XR/L1010X09 10 | 10 | 120 | 19 | 10 | 0 | 0.2 | VXGU09T2L/R... | 0.9 |
| JPVJ2XR/L1212F09 12 | 12 | 85 | 19 | 12 | 0 | 0.2 | VXGU09T2L/R... | 0.9 |
| JPVJ2XR/L1212X09 12 | 12 | 120 | 19 | 12 | 0 | 0.2 | VXGU09T2L/R... | 0.9 |
| JPVJ2XR/L1616X09 16 | 16 | 120 | 19 | 16 | 0 | 0.2 | VXGU09T2L/R... | 0.9 |
| Torque: Recommended clamping torque (N∙m) |
| RE: Standard corner radius |
| Use right-hand toolholders (R) with left-hand inserts (L). |
| Use left-hand toolholders (L) with right-hand inserts (R). |
| SPARE PARTS | |
| Designation Lever | Pin Clamping screw Wrench |
| JPVJ2XR/L... SLLV-1 | SL-PI-2 SR10400611 HW2.0/5RED |
JPVJ2XR/L... SLLV-1 SL-PI-2 SR10400611 HW2.0/5RED 4
| 93° | 50° | WF OAW LH HF , | LF 5/16”-24UNF B H , | LH WF HF OAW | LF , | 5/16”-24UN H B | F 5/16”-24U LF LH WF HF OAW Without offs | NF B H Threading et |
| Cutting edge style | J2 | F | ig.1 | | Fig.2 | | Right hand Fig.3 | g (R) shown. |
| Designation | H | B LF | LH HF | WF | OAW | RE | Torque Insert | ovin Fig. |
| JSVJ2XR1012H07-CHP () | 10 | 12 100 | 17 10 | 0 | 13.4 | 0.2 | VXGU09T2L 0.9 | 1 ro |
| JSVJ2XR/L1212F09-CHP | 12 | 12 85 | 20 12 | 0 | 13.5 | 0.2 | VXGU09T2L/R... 0.9 | 3 G |
| JSVJ2XR1212X09-CHP () | 12 | 12 120 | 19.5 12 | 0 | 13.4 | 0.2 | VXGU09T2L 0.9 | 2 |
| JSVJ2XR1616X09-CHP () | 16 | 16 120 | 19.5 16 | 0 | 16 | 0.2 | VXGU09T2L 0.9 | 2 |
| () Direct coolant supply Torqu Right-hand toolholders (R) are SPARE PARTS | e: Recommende used with left-ha | d clamping torque (N nd inserts (L). Left-ha | ∙m) RE: Standard co nd toolholders (L) are u | rner radius sed with rig | ht-hand inse | rts (R). | | ndmill |
| Designation | Clamping screw | Coolant unit | Wrench 1 | Coolant | plug | Wrench 2 | DirectJet plug Wre | E nch 3 |
| JSVJ2XR/L1212F09-CHP | SR34-508 | S-CU-CHP | T-7F | SR5/16UNF | TL360 | P-4 | - | - |
| JSVJ2XR1012H07-CHP | SR34-508 | - | T-7F | SR5/16UNF | TL360 | P-4 | SSHM4-6-TB P | -2 |
| JSVJ2XRX09-CHP | SR34-508 | S-CU-CHP | T-7F | SR5/16UNF | TL360 | P-4 | SSHM4-6-TB P | -2 |
Please see Tungaloy report (TR432) for tool overhang length and coolant plug. 8
9
Reference pages : JPVJ2XR/L, JSVJ2XR-CHP: Inserts → 2-35 -, Parts for coolant hose → 3-61
Общий каталог Tungaloy 2020 - 2021
Каталог Tungaloy глубокое сверление 2
Каталог Tungaloy зубофрезерование
Брошюра Tungaloy новая продукция
Каталог Tungaloy глубокое сверление 1