Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | [email protected] Insert ISO Designation Metric Milling Introduction A P F W 16 1 2 3 4 5 1 Shape 2 Clearance A H M O R C D E G S T X Z N P Other normal clearances special requiring SPECIAL specification Symbol O. 3 Tolerance Class D M S A(1) mm ±0,025 ±0,005 ±0,025 C(1) mm ±0,025 ±0,013 ±0,025 E(1) mm ±0,025 ±0,025 ±0,025 F(1) mm ±0,013 ±0,005 ±0,025 G mm ±0,025 ±0,025 ±0,130 H(1) mm ±0,013 ±0,013 ±0,025 J(1) mm from ±0,050 ±0,005 ±0,025 to ±0,150 K(1) mm from ±0,050 ±0,013 ±0,025 to ±0,150 L(1) mm from ±0,050 ±0,025 ±0,025 to ±0,150 M mm from ±0,050 from ±0,080 ±0,13 to ±0,150 to ±0,200 N mm from ±0,050 from ±0,080 ±0,025 to ±0,150 to ±0,200 U mm from ±0,080 from ±0,130 ±0,13 to ±0,250 to ±0,380 (1) Indexable inserts with ground wiper edges. (2) Dependent upon the insert size (see ISO 1832 standard) 4 Type H Q T W N R U X Special feature requiring additional specifications. A26 www.kennametal.com