Каталог Stellram фрез со сменными пластинами - страница 28

Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | sales@sverla-ekb.ru Insert ISO Designation Metric 04 PD T R - Milling Introduction 6 7 8 9 10 5 Size 7 Corner continued A H M O R 1 2 Inserts With Wiper Edges. S T X Z Two Letter Symbol: special For cutting For wiper edge 1 edge angle χ 2 normal clearance r A = 3° A = 45° B = 5° D = 60° C = 7° 6 Thickness E = 75° D = 15° F = 85° E = 20° P = 90° F = 25° G = 30° N = 0° 02 = 2,38 mm P = 11° 03 = 3,18 mm Z = Any other wiper edge clearance. 8 Edge Condition T3 = 3,97 mm F E T 04 = 4,76 mm Sharp Cutting Rounded Chamfered Edges Cutting Edges Cutting Edges M5 = 5,00 mm 05 = 5,56 mm K S P 06 = 6,35 mm Double Chamfered Double Chamfered Rounded Chamfered Rounded 7 Corner Cutting Edges Cutting Edges Cutting Edges OPTIONAL SYMBOL Rounded Corner Inserts Value of corner radius given in 1/10 mm 9 Cutting Direction Note: For sharp corner R L N Symbol = 00 Rounded Inserts Symbol = 00 Right Hand Insert Left Hand Insert Neutral Insert If the Ø is converted from an inch value. OPTIONAL SYMBOL Symbol = M0 If the Ø is converted from a metric value. 10 Optional Manufacturers optional symbol consisting of numbers or letters; shall be separated from the standardized designation by a dash (-). OPTIONAL SYMBOL www.kennametal.com A27