Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | [email protected] 7702VRD12 & 7712VRD12 Copy/Contour Milling Cutter d1 Product Dimensions (mm) Spares No. of Screw L EDP Item Description Da* L l1 d1 ap max Teeth EDP EDP Tightening Nm 7702VRD12 Weldon Shank Contour Mills I1 025703 7702VRD12WA025R70 25 126 70 25 6 2 015269 F3508T 015240 T15 2,10 025705 7702VRD12WA032R70 32 130 70 32 6 3 015269 F3508T 015240 T15 2,10 7712VRD12 Shell Mill Fixation Da* 029054 7712VRD12-A052R 52 55 - 22 6 5 015269 F3508T 015240 T15 2,10 029055 7712VRD12-A066R 66 55 - 27 6 6 015269 F3508T 015240 T15 2,10 Weldon Shank 029056 7712VRD12-A080R 80 55 - 27 6 7 015269 F3508T 015240 T15 2,10 Da* = Outside Diameter d1 The cutter series 7702VRD is a without a anti-rotation pocket, which allows a maximum number of insert indexing according to the axial depth of cut (ap) requirement. This is an advantage when the cutter is used for semi-finishing and finishing with low axial depth of cut (ap). H Product Dimensions (mm) Spares No. of Screw EDP Item Description Da* L M d1 ap max Teeth EDP EDP Tightening Da* Nm 7712VRD12 Modular Head Shell Mill Fixation 031383 7712VRD12SA035R35 35 35 M16 17,0 6 3 022056 F3507T 015240 T15 2,10 Note: For Cylindrical shank extensions in high density alloy with through coolant refer to page A76. M Da* = Outside Diameter The 7712VRD series with anti-rotation pocket ensures a precise number indexes per insert. d1 This unique patented pocket design prevents the inserts from rotating in the pocket during heavy feed machining and unstable conditions. The insert for the 7712VRD12 cutter is 6 times indexable. L Da* Modular Head 7702VRD12 & 7712VRD12 Technical Information (mm) Product Dimensions EDP Item Description Facing Ramping Helical Hole ap max Max Pitch Angle ° min. - max. Helical / RPM Linear Ramping Helical 025703 7702VRD12WA025R70 13 16,50 28 48 4,00 50000 Interpolation 025705 7702VRD12WA032R70 20 12,00 42 62 4,00 40000 029054 7712VRD12-A052R 40 5,00 82 102 4,00 28500 029055 7712VRD12-A066R 54 3,70 110 130 4,00 24500 Flat 029056 7712VRD12-A080R 68 2,80 138 158 4,00 21500 ap 031383 7712VRD12SA035R35 23 18,60 48 68 4,00 37500 Facing Pitch Depth of Cut (ap) A222 www.kennametal.com