Каталог Stellram фрез со сменными пластинами - страница 224

Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | sales@sverla-ekb.ru 7702VRD12 & 7712VRD12 Milling Inserts & Recommended Feeds RDET12-701 RDMW12 RDMW12-20 RDHW12-20 Product Application & Material Dimensions (mm) d s Roughing Semi-Finishing Finishing EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min ap max ap min - max ap min - max 3,50* 0,50 - 2,50 0,10 - 0,80 Contour Mills 034560 RDET12T3M0E-701-X6 SP4019 - - 12,00 - 3,97 6,00 0,05 031524 RDMW12T3M0T-X6 SP5419 - - 12,00 - 3,97 6,00 0,15 034562 RDHW12T3M0T-X6 SP4019 - 12,00 - 3,97 6,00 0,15 031523 RDMW12T3M0T-20-X6 SP5419 - - 12,00 - 3,97 6,00 0,20 031519 RDHW12T3M0T-20-X6 SP5419 - - 12,00 - 3,97 6,00 0,20 034561 RDHW12T3M0T-20-X6 SP4019 - - 12,00 - 3,97 6,00 0,20 Machining Choice: 1 Choice st 2 Choice nd 3 Choice | Material Guide Key descriptions found on page A5. rd * Max. recommended ap = 3,5mm (depending on the application) RDMW12T3MOT-20-X6 and RDHW12T3MOT-20-X6 are for heavy roughing applications. 7702VRD12 & 7712VRD12 Feeds fz (mm/tooth) <16% Si 116 HBN >16% Si 92 HBN Chilled Cast Iron Stainless Steel Refractory PH >1400 N/mm2 >1400 N/mm2 HTA Titanium Based Alloys Based Alloys Based Alloys Based Alloys Aluminium & Aluminium & Spheroidal- Ductile Iron HTA Cobalt HTA Nickel Hard Steel >415 HBN >400 HBN Unalloyed Malleable Stainless HTA Iron Alloyed Silicon Alloys Steel Steel Steel Geometry Operation Gray Iron Iron Grade Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. E-701-X6 SP4019 Contouring 0,07 - 0,20 0,07 - 0,18 - - 0,07 - 0,20 0,07 - 0,20 0,07 - 0,18 0,05 - 0,14 0,05 - 0,12 - - - - 0,04 - 0,08 0,04 - 0,08 RDMW... SP5419 T-X6 Contouring 0,20 - 0,32 0,20 - 0,30 - - - - - - - - - - - - - RDHW... SP4019 T-X6 Contouring 0,20 - 0,30 0,20 - 0,28 - - 0,20 - 0,30 0,20 - 0,30 0,20 - 0,25 - - - - - - 0,10 - 0,12 0,10 - 0,12 RDMW... SP5419 T-20-X6 Contouring 0,30 - 0,45 0,30 - 0,42 - - - - - - - - - - - - - RDHW... SP5419 T-20-X6 Contouring 0,30 - 0,45 0,30 - 0,42 - - - - - - - - - - - - - RDHW... SP4019 Contouring 0,30 - 0,42 0,30 - 0,40 - - 0,30 - 0,45 0,30 - 0,45 0,30 - 0,42 - - - - - - 0,10 - 0,14 0,10 - 0,14 T-20-X6 Note: HTA = High Temperature Alloys Note: Speed recommendations can be found on page A226. www.kennametal.com A223