Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | sales@sverla-ekb.ru 7702VRD10 Milling Inserts & Recommended Feeds RDET10-701 RDHW10 Product Application & Material Dimensions (mm) d s Roughing Semi-Finishing Finishing EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min ap max ap min - max ap min - max Contour Mills 2,50* 0,40 - 2,00 0,10 - 0,80 034558 RDET1003M0E-701 SP4019 - - 10,00 - 3,18 5,00 0,05 034559 RDHW1003M0T SP4019 10,00 - 3,18 5,00 0,12 Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. * Max. recommended ap = 2,5mm (depending on the application) 7702VRD10 Feeds fz (mm/tooth) Geometry Grade Operation Unalloyed Steel Alloyed Steel Stainless Steel Stainless Steel Refractory PH Gray Iron Spheroidal- Ductile Iron Malleable Iron Aluminium & Alloys <16% Si 116 HBN Aluminium & Silicon >16% Si 92 HBN HTA Iron Based Alloys HTA Cobalt Based Alloys HTA Nickel Based Alloys HTA Titanium Based Alloys Hard Steel >1400 N/mm2 >415 HBN Chilled Cast Iron >1400 N/mm2 >400 HBN Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. E-701 SP4019 Contouring 0,07 - 0,15 0,07 - 0,12 - - 0,07 - 0,15 0,07 - 0,15 0,12 - 0,10 0,05 - 0,12 0,05 - 0,10 - - - - 0,04 - 0,07 0,04 - 0,07 T SP4019 Contouring 0,18 - 0,28 0,18 - 0,25 - - 0,18 - 0,28 0,18 - 0,28 0,18 - 0,25 - - - - - - 0,06 - 0,10 0,06 - 0,10 Note: HTA = High Temperature Alloys Speed recommendations can be found on page A226. www.kennametal.com A221