Каталог SGS микро инструмент 2021 - страница 33

FRACTIONAL M3 • M3CR • 1.5xD • 12xD Overall Reach POS 30° 15° 3 LF LU APMX DCON M3 • M3CR • 1.5xD TOLERANCES (inch) .010–.120 DIAMETER DC DN 12xD RE FRACTIONAL SERIES DC = +0.000/–0.001 DCON = h 6 inch EDP NO. • Three flute design RE = +0.0000 / –0.0005 CUTTING SHANK LENGTH NECK OVERALL CORNER TI- features improved chip DIAMETER DIAMETER OF CUT REACH DIAMETER LENGTH RADIUS UNCOATED NAMITE-A space over four flutes DC DCON APMX LU DN LF RE (AlTiN) and increased strength and feed capability over STEELS 0.010 1/8 0.015 0.120 0.009 2-1/2 – 09595 03589 two flutes. STAINLESS STEELS 0.015 1/8 0.023 0.180 0.014 2-1/2 – 09602 03590 • Enhanced corner 0.015 1/8 0.023 0.180 0.014 2-1/2 0.003 08784 08886 geometry with tight CAST IRON tolerance corner radii 0.020 1/8 0.030 0.240 0.018 2-1/2 – 09609 03591 • Proprietary coating HIGH TEMP ALLOYS 0.020 1/8 0.030 0.240 0.018 2-1/2 0.005 08787 08889 allows for superior chip flow, driving industry TITANIUM 0.025 1/8 0.038 0.300 0.023 2-1/2 – 09616 03592 leading productivity HARDENED STEELS 0.025 1/8 0.038 0.300 0.023 2-1/2 0.005 08790 08892 and value, even at low spindle speeds. 0.030 1/8 0.045 0.360 0.028 2-1/2 – 09623 03593 NON-FERROUS • High performance 0.030 1/8 0.045 0.360 0.028 2-1/2 0.005 08793 08895 carbide substrate designed specifically for PLASTICS/COMPOSITES 0.031 1/8 0.047 0.372 0.029 2-1/2 – 09630 03594 Micro Tool applications. 0.035 1/8 0.053 0.420 0.032 2-1/2 – 09637 03595 • Broad portfolio, offering 0.035 1/8 0.053 0.420 0.032 2-1/2 0.005 08796 08898 consistent lengths of cut, to ensure 0.035 1/8 0.053 0.420 0.032 2-1/2 0.010 08799 08901 application demands 0.040 1/8 0.060 0.480 0.037 2-1/2 – 09644 03596 are met. • Advanced geometries 0.040 1/8 0.060 0.480 0.037 2-1/2 0.005 08802 08904 that extend tool life, 0.040 1/8 0.060 0.480 0.037 2-1/2 0.010 08805 08907 reduce chatter, cut cycle times, and improve part 0.045 1/8 0.068 0.540 0.042 2-1/2 – 09651 03597 quality. 0.045 1/8 0.068 0.540 0.042 2-1/2 0.005 08808 08910 • All tools in stock to 0.045 1/8 0.068 0.540 0.042 2-1/2 0.010 08811 08913 meet customer order requirements. 0.047 1/8 0.071 0.564 0.044 2-1/2 – 09658 03598 • All micro tools are 0.050 1/8 0.075 0.600 0.047 2-1/2 – 09665 03599 manufactured in accordance with the 0.050 1/8 0.075 0.600 0.047 2-1/2 0.005 08814 08916 KSPT ISO certified 0.050 1/8 0.075 0.600 0.047 2-1/2 0.010 08817 08919 quality procedures. 0.050 1/8 0.075 0.600 0.047 2-1/2 0.015 08820 08922 0.055 1/8 0.083 0.660 0.051 2-1/2 – 09672 03600 0.060 1/8 0.090 0.720 0.056 2-1/2 – 09679 03601 0.060 1/8 0.090 0.720 0.056 2-1/2 0.005 08823 08925 0.060 1/8 0.090 0.720 0.056 2-1/2 0.010 08826 08928 0.060 1/8 0.090 0.720 0.056 2-1/2 0.015 08829 08931 0.062 1/8 0.093 0.744 0.058 2-1/2 – 09686 03602 0.065 1/8 0.098 0.780 0.061 2-1/2 – 09693 03603 0.070 1/8 0.105 0.840 0.065 2-1/2 – 09700 03604 0.070 1/8 0.105 0.840 0.065 2-1/2 0.005 08832 08934 0.070 1/8 0.105 0.840 0.065 2-1/2 0.010 08835 08937 0.070 1/8 0.105 0.840 0.065 2-1/2 0.015 08838 08940 0.075 1/8 0.113 0.900 0.070 2-1/2 – 09707 03605 continued on next page 33 END MILLS www.sgsmicrotools.com END MILLS