Каталог SGS монолитный инструмент из композитных материалов - страница 18

Предыдущая страница Следующая страница

Навигация

25, 27CutSpeedFeed (inch/flute)
(FRACTIONAL)Typesfm1/45/163/81/23/4
Slot4000.00160.00250.00300.00400.0048
CFRP, AFRP (Carbon Fiber Aramid Fiber)Profile5000.00160.00250.00300.00400.0048
,Light8250.00370.00570.00690.00920.0110
Slot3200.00160.00250.00300.00400.0048
GFRP (Fiberlass)Profile4000.00160.00250.00300.00400.0048
gLight6600.00370.00570.00690.00920.0110
Slot4800.00200.00310.00380.00500.0060
CARBON, GRAPHITEProfile6000.00200.00310.00380.00500.0060
Light9900.00460.00720.00860.01150.0138
Slot8000.00200.00310.00380.00500.0060
PLASTICProfile10000.00200.00310.00380.00500.0060
Light16500.00460.00720.00860.01150.0138
Slot400.00080.00130.00150.00200.0024
MACHINABLE CERAMIC, MACHINABLE GLASSProfile500.00080.00130.00150.00200.0024
Light850.00180.00290.00340.00460.0055
Cut Type
SlotProfileLight
2725, 2725, 27
Rw = D1Rw = .5 x D1Rw = .05 x D1
Ad = D1Ad = 1.5 x D1Ad = L2

rpm = sfm x 3.82 / D ipm = (inch/flute) x no. of flutes x rpm

- reduce speed when overheating causes melting or damage to resin - reduce feed if delamination or fraying occurs - finish cuts typically require reduced feed and cutting depths - rates shown are for use without coolant; rates may be increased with coolant use - dust collection is vital when machining dry - diamond coating will increase tool life in graphite and composite materials - refer to the SGS Tool Wizard for more complete technical information (available at www.sgstool.com)