Каталог SGS монолитный инструмент из композитных материалов - страница 13

Предыдущая страница Следующая страница

Навигация

20M, 31MCutSpeedFeed (mm/rev)
(METRIC)Typem/min1.6361012
Slot1200.0300.0600.1200.2300.305
CFRP, AFRP (Carbon Fiber Aramid Fiber)Profile1500.0300.0600.1200.2300.305
,Light2500.0700.1400.2800.5250.700
Slot1000.0300.0600.1200.2300.305
GFRP (Fiberglass)Profile1200.0300.0600.1200.2300.305
Light2000.0700.1400.2800.5250.700
Slot1450.0400.0750.1500.2900.380
CARBON, GRAPHITEProfile1850.0400.0750.1500.2900.380
Light3000.0900.1750.3500.6550.875
Slot2450.0400.0750.1500.2900.380
PLASTICProfile3050.0400.0750.1500.2900.380
Light5050.0900.1750.3500.6550.875
Slot100.0150.0300.0600.1150.150
MACHINABLE CERAMIC, MACHINABLE GLASSProfile150.0150.0300.0600.1150.150
Light250.0350.0700.1350.2600.350

Cut Type

SlotProfileLight
31M31M20M, 31M
Rw = DRw = .5 x DRw = .05 x D

1 1 1

Ad = D Ad = 1.5 x D Ad = L

1 1 2

rpm = (1000 x m/min) / (3.14 x D ) 1 mm/min = (mm/rev) x rpm - maximum recommended depths shown - adjust speed and feed based upon resin type and/or fiber structure - reduce speed when overheating causes melting or damage to resin - reduce feed if delamination or fraying occurs - finish cuts typically require reduced feed and cutting depths - rates shown are for use without coolant; rates may be increased with coolant use - dust collection is vital when machining dry - diamond coating will increase tool life in graphite and composite materials - refer to the SGS Tool Wizard for more complete technical information (available at www.sgstool.com)