Общий каталог PRECITOOL - страница 615

Clamping Devices Clamping devices and accessories Design: - for the fixture plate - universal clamping system - for arbitrarily shaped workpieces Conform to DIN 912with eccentric head - the clamp adapts to the workpiece contour - universal application - no need for special fixtures - simple construction - secure clamping - tension clamp can also be used as a stop - multi-sided machining - low construction - clamping force up to 27 kN 297983 Eccentric tension clamp for fixture plate Thread 297983 Kmm Lmm Hex socketmm EccentrictravelmmS1mmClampingpowerkNPU Thread 297983 Kmm Lmm Hex socketmm EccentrictravelmmS1mmClampingpowerkNPU M4  2.8 10 3 0.8  8 0.9 10 M10   6.4 20  7 1.6 20  9.0 10 M6  4.8 12 4 1.3 16 3.4 10 M12   9.5 25  8 2.0 25 18.0  8 29 M8Design:  4.8 16 5 1.0 20 3.6 12 M16  12.7 30 12 2.5 30 27.0  4 - with T-nut for the fixture plate and for T-slots at the machine table - universal clamping system for workpieces of any shape - the clamp adapts to the workpiece contour 297984 Eccentric tension clamp for T-slots Amm 297984 G S1 K B H Thread lengthmmmmmmmmmmHex socketmmEccentric travel CmmClampingpowerkN PU 0008  M6  × 1.00 16  4.8 23.2  9.5 12  3 1.0  3.4 2 0010  M6  × 1.00 16  4.8 23.2 14.2 12  4 1.0  3.4 2 0012  M8  × 1.25 21  4.8 27.9 15.9 16  5 1.0  3.6 2 0014  M10 × 1.50 21  6.4 30.5 22.2 20  7 1.6  9.0 2 0016  M12 × 1.75 25  9.5 30.9 22.2 25  8 2.0 18.0 2 0018  M12 × 1.75 25  9.5 34.7 28.6 25  8 2.0 18.0 2 0020  M16 × 2.00 30 12.7 39.2 31.8 30 12 2.5 27.0 2 0022  M16 × 2.00 30 12.7 44.3 41.3 30 12 2.5 27.0 2 Design: - for fixture base plates - the pull-down effect presses the workpiece onto the support - the front side acts as clamp, the back can be used as stop - clamping disk with serrated surface for blanks and smooth surface for machined parts - clamping power 18 kN Conform to DIN 912 with eccentric head 297985 Combi pull-down tension clamp for the fixture plate Thread 297985 Eccentric screw Eccentric travelmm Mountingscrew Amm Bmm Cmm Dmm E Fmmmm Gmm PU M10  M10 × 1.50 1.6 M8 × 16 43.2 19.0 12.7 25.4 1.6 19.0  6.4 1 M12  M12 × 1.75 2.0 M10 × 20 54.0 25.4 11.4 33.5 2.0 25.4  9.7 1 M16  M16 × 2.00 2.5 M12 × 30 75.0 38.1 25.5 50.8 2.5 38.1 12.7 1 Design:- the pull-down effect presses the workpiece onto the support Eccentric screw - for T-slots 14, 16, 18 mm and for direct mounting on the fixture base plate or the machine table - eccentric clamping screw M12 for clamping power 18 kN - body and clamping plate case-hardened - with serrated section for blanks and smooth section for machined parts - adapts to the angular characteristics of the workpiece, i.e. the workpiece does not have to be at right angles for DIN 650 297986 Pull-down clamping claw for machine table and fixture base plate T-slotmm 297986 G A Bmmmm C(rear)mm C(front)mm D Emmmm PU 0001  without T-nut 50 28.4 16 12.7 25.5 2 1 0014  M10 × 1.50 50 28.4 16 12.7 25.5 2 1 0016  M12 × 1.75 50 28.4 16 12.7 25.5 2 1 0018  M16 × 2.00 50 28.4 16 12.7 25.5 2 1 29/610 www.precitool.de