Tap Drills Milling cutter with countersink step, universal Cat. no. PN/mm2 MN/mm2 KHB SN/mm2 NN/mm2 G Whitworth VHM G. Whitworthpipe thread55°DIN228Teeth4 2×D 138947 < 1400 < 1100 <300 < 1250 Copper < 700 Alu < 600 pipe thread coated vc = m/min. 138947 30-200 30-120 80-200 30-80 100-350 100-350 6535 HA ICS UNI shank Design Use: 13 - thread milling cutters for internal and external threads-2×D- 45° chamfer- universally applicable tool for the combined productionof internal threads with countersink- increased productivity by countersinking and thread - TiAIN coated milling in one operation without tool change - shank design HA - machining of materials up to 44 HRC - with cooling duct and right-hand spiral - usable for both Rp and DIN 2999 138947 JBO, VHM, GFS, WW-R, 2 × D, TiAlN, with ICS Type 138947 d1 Pmm d3 l1mmmm l2mm l3mm l5mm d2mm Z fzmm/tooth 0002  1/8" 28.00 10.2 80 21.25 45 22.3 12 4 0.020 - 0.200 0004  1/4" 19.00 13.8 90 28.65 45 30.1 14 4 0.020 - 0.200 0006  3/8" 19.00 17.5 102 35.35 48 36.9 18 4 0.020 - 0.200 Milling cutter Universal Cat. no. PN/mm2 MN/mm2 KHB SN/mm2 NN/mm2 M Metric MF Metric VHM Metric Metric fine60°60°DIN13 138952 < 1400 < 1100 <300 < 1250 Copper < 700 Alu < 600 thread fine thread coated vc = m/min.13895230-20030-12080-20030-80100-350100-350 Teeth4-5 6535 HA ICS UNI shank Design: Use: - thread milling cutter for female threads - universally applicable tool for the - TiAIN coated production of a wide thread x range - shank design HA with defined pitch - with cooling duct and right-hand spiral - machining of materials up to 44 HRC 138952 JBO, VHM, GFM, metric, metric-fine, TiAlN, with ICS Type 138952 d1 Pmm l1mm l2mm l4mm d2mm Z fzmm/tooth Type 138952 d1 Pmm l1mm l2mm l4mm d2mm Z fzmm/tooth 0016  8 0.50 64 16 16 8 4 0.030 - 0.200 0040  16 1.00 90 25 40 16 5 0.030 - 0.200 0017  8 0.75 64 16 16 8 4 0.030 - 0.200 0041  16 1.50 90 25 40 16 5 0.030 - 0.200 0021  10 0.75 70 16 25 10 4 0.030 - 0.200 0042  16 2.00 90 25 40 16 5 0.030 - 0.200 0022  10 1.00 70 16 25 10 4 0.030 - 0.200 0043  16 2.50 90 25 40 16 5 0.030 - 0.200 0023  10 1.25 70 16 25 10 4 0.030 - 0.200 0048  18 3.00 102 33 50 18 5 0.030 - 0.200 0024  10 1.50 70 16 25 10 4 0.030 - 0.200 0052  20 1.00 105 33 50 20 5 0.030 - 0.200 0026  12 0.50 80 20 31 12 4 0.030 - 0.200 0053  20 1.50 105 33 50 20 5 0.030 - 0.200 0027  12 0.75 80 20 31 12 4 0.030 - 0.200 0054  20 2.00 105 33 50 20 5 0.030 - 0.200 0029  12 1.00 80 20 31 12 4 0.030 - 0.200 0055  20 2.50 105 33 50 20 5 0.030 - 0.200 0030  12 1.25 80 20 31 12 4 0.030 - 0.200 0056  20 3.00 105 33 50 20 5 0.030 - 0.200 0031  12 1.50 80 20 31 12 4 0.030 - 0.200 0057  20 3.50 105 33 50 20 5 0.030 - 0.200 0032  12 2.00 80 20 31 12 4 0.030 - 0.200 0058  20 4.00 105 33 50 20 5 0.030 - 0.200 Milling cutter Universal Cat. no. PN/mm2 MN/mm2 KHB SN/mm2 NN/mm2 G Whitworth VHM G. Whitworthpipe thread55°DIN Teeth2284-5 6535 HA 138954 < 1400 < 1100 <300 < 1250 Copper < 700 Alu < 600 pipe thread coated shank vc = m/min. 138954 30-200 30-120 80-200 30-80 100-350 100-350 ICS UNI Design: Use: - thread milling cutter for internal and external threads - universally applicable tool for the production - TiAIN coated of a wide thread x range with defined pitch - shank design HA - machining of materials up to 44 HRC - with cooling duct and right hand spiral flutes - also usable for W, Rp and DIN 2999 138954 JBO, VHM, GFM, WW-R, TiAlN, with ICS Type 138954 d1 Pmm for threads l1mm l2mm l4mm d2mm Z fzmm/tooth 0002  10 19.00 G1/4" 70 16 25 10 4 0.030 - 0.200 0004  16 14.00 G1/2" 90 25 40 16 5 0.030 - 0.200 0006  20 11.00 G1" 105 33 50 20 5 0.030 - 0.200 0008  25 11.00 G1 1/2" 115 40 57 25 6 0.030 - 0.200 13/204 www.precitool.de