Пластины с геометрией FV для токарной обработки Kennametal 2023 - страница 5

Positive Insert Geometry Cutting Condition -11 -UF -LF -FP -MF -MP KCP25C/ KCP25C/ heavily interrupted cut - KCP30B/ KCP25C KCP25C/KCP30B - KCU10B KCP40B KCP25C/ lightly interrupted cut - KCP25C KCP25C KCP25C KCP25C KCU10B varying depth of cut, KTP10/ KCP10B/ KCU10B/ KCP10B KCU10B KCP10B casting, or forging skin KT315 KCU10B KCP10 smooth cut, KTP10/ KCP05B/ KCP05B KCP05B KCP10B - pre-turned surface KT315 KCP10B KCU10B/ smooth cut, high precision KTP10/ - KCU10B KTP10/ - KCU10B / tight tolerance KT315 KT315 NOTE: Bold is first choice when showing multiple grades. Step 1 - Select the insert geometry Negative Wiper Inserts Positive Wiper Inserts 1/2” IC CNMG432 Size 3 CCMT3252/CCGT3252 feed rate (mm/rev) feed rate (mm/rev) -RW depth of cut (mm) depth of cut (mm) depth of cut (in) depth of cut (in) -MW -MW -FW -FW feed rate (in/rev) feed rate (in/rev) Negative Wiper Insert Positive Wiper Inserts 1/2" IC CNMG432 Size 3 CCMT3252/CCGT3252 min feed min DOC max feed max DOC min feed min DOC max feed max DOC mm in mm in mm in mm in mm in mm in mm in mm in -FW 0,2 0.008 0,3 0.012 0,4 0.016 2 0.079 -FW 0,1 0.004 0,2 0.008 0,3 0.012 2,3 0.091 -MW 0,3 0.012 0,8 0.031 0,6 0.024 5,1 0.201 -MW 0,1 0.004 0,4 0.016 0,5 0.02 2,5 0.098 ..MM-RW 0,3 0.012 1,3 0.051 1,3 0.051 12,7 0.5 5