Пластины с геометрией FV для токарной обработки Kennametal 2023 - страница 6

Step 2 - Select the grade WIPER Negative Insert Geometry WIPER Positive Insert Geometry Cutting Condition -FW -MW -RW Cutting Condition -FW -MW heavily interrupted cut - KCP25C KCP25C heavily interrupted cut KCP25C KCP25C KCP10B/ lightly interrupted cut KCP25C KCP25C lightly interrupted cut KCP25C KCP25C KCP10 varying depth of cut, KCP25C/ KCP10B/ KCP25C/ KCP10B/ KCP25C/ casting, or forging skin KCP10 KCP10 varying depth of cut, KCP10B/ KCP10B/ KCP25C smooth cut, pre-turned KCP10B/ KCP10B/ casting, or forging skin KCP10 KCP10 surface KCP10 KCP10 smooth cut, KCP05B/ KCP05B/ smooth cut, high precision KCU10B/ KTP10/ KCU10B/ KTP10/ - pre-turned surface KCP05 KCP05 / tight tolerance KT315 KT315 smooth cut, high precision KCU10B/ KTP10/ - - / tight tolerance KT315 NOTE: Bold is first choice when showing multiple grades. Step 1 - Select the insert geometry Negative Heavy Duty Inserts Positive Heavy Duty Inserts 3/4” IC CNMM644 RCMX32 feed rate (mm/rev) feed rate (mm/rev) RM RH RP RP RH UPG depth of cut (mm) depth of cut (mm) depth of cut (in) depth of cut (in) feed rate (in/rev) feed rate (in/rev) Negative Heavy Duty Inserts Positive Heavy Duty Inserts 3/4" IC CNMM644 RCMX32 min feed min DOC max feed max DOC min feed min DOC max feed max DOC mm in mm in mm in mm in mm in mm in mm in mm in -RP 0,2 0.008 1,28 0.05 1,3 0.051 10 0.394 -UPG 0,3 0.012 1,3 0.051 2,56 0.102 12,8 0.504 -RM 0,3 0.012 1,28 0.05 1,3 0.051 12,7 0.5 -RP 0,3 0.012 1,3 0.051 2,56 0.102 12,8 0.504 -RH 0,4 0.016 1,28 0.05 1,3 0.051 12,7 0.5 -RH 0,3 0.012 1,3 0.051 2,56 0.102 12,8 0.504 Step 2 - Select the grade Heavy Duty Negative Insert Geometry Heavy Duty Positive Insert Geometry Cutting Condition -RP -RM -RH Cutting Condition -UPG -RP -RH KCP30B/ KCP30/ KCP30B/ KCP30/ KCP30B/ KCP30/ KCP30B/ KCP30/ KCP30B/ KCP30/ heavily interrupted cut heavily interrupted cut - KCP40B/ KCP40 KCP40B/ KCP40 KCP40B/ KCP40 KCP40B/ KCP40 KCP40B/ KCP40 KCP25C/ KCP30B/ KCP25C/ KCP30B/ KCP25C/ KCP30B/ KCP25C/ KCP30B/ KCP25C/ KCP30B/ KCP25C/ KCP30B/ lightly interrupted cut lightly interrupted cut KCP30 KCP30 KCP30 KCP30 KCP30 KCP30 varying depth of cut, casting, or KCP25C/ KCP10B/ KCP25C/ KCP10B/ KCP25C/ KCP10B/ varying depth of cut, casting, or KCP25C/ KCP10B/ KCP25C/ KCP10B/ KCP25C/ KCP10B/ forging skin KCP10 KCP10 KCP10 forging skin KCP10 KCP10 KCP10 smooth cut, smooth cut, KCPK05/ KCP10B/ KCP10B/ KCP10 KCP10B/ KCP10 KCP10B/ KCP10 KCP10B/ KCP10 KCP10B/ KCP10 pre-turned surface pre-turned surface KCP10 NOTE: Bold is first choice when showing multiple grades. 6