Каталог Iscar вращающийся инструмент 2017 - страница 278
Навигация
Каталог Iscar токарные пластины ISO 2022
Каталог Iscar инструмент для фрезерования
Каталог Iscar решения для глубокого сверления
Каталог Iscar полирующие фрезы
Новые режущие инструменты Iscar 2026
Каталог Iscar новые продукты 2018
Recommended Cutting Conditions for Face Milling
Ap
Ae
TANGPLUNGE - FACE MILLING
Workpiece Material
ISO
class Typical Representative
Carbide
| DIN/ | ISCAR | grade | Cutting | ||||||
| ISO | mat. | AISI/SAE/ | Hardness, Insert HTP | for | speed Vc, | Feed Fz, | |||
| 513 | Description | group* | ASTM | DIN W.-Nr. | HB | LN… type inserts | m/min | mm/t | Coolant |
| Non-alloy steel | 4 | 1060 | 1.1221 | 180-200 | 80-120 | 0.1-0.2 | |||
| Low alloy steel | 8 | 4340 | 1.6582 | 260-300 | 80-120 | 0.1-0.18 | |||
| IC830/ | Air | ||||||||
| HRC | IC928 | blow | |||||||
| Low alloy steel | 9 | 3135 | 1.571 | 80-120 | 0.1-0.15 | ||||
| P | 35-40** | ||||||||
| …ER | |||||||||
| High alloy steel | 10 | H13 | 1.2344 | 200-220 | 80-100 | 0.08-0.15 | |||
| IC830/ | |||||||||
| Air blow/ | |||||||||
| Martensitic s.s. | 12 | 420 | 1.4021 | 200 | IC330/ | 80-100 | 0.08-0.15 | ||
| wet | |||||||||
| IC328 | |||||||||
| IC830/ | |||||||||
| M | Wet | ||||||||
| Austenitic s.s. | 14 | 304L | 1.4306 | 200 | …ER IC330/ | 60-80 | 0.08-0.1 | ||
| (emulsion) | |||||||||
| IC328 | |||||||||
| Grey cast iron | 16 | Class 40 | 0.6025 (GG25) | 250 | 150-200 | 0.12-0.2 | |||
| IC810/ | Air | ||||||||
| K | Nodular cast | Class | …ER | ||||||
| 17 | 0.7050 (GGG50) | 200 | IC910 | 100-180 | 0.1-0.18 | blow | |||
| iron | 65-45-12 | ||||||||
| Ni-based HTSA | 34 | Inconel 718 | 2.4668 | 350 | 20-25 | 0.08-0.12 | |||
| IC328/ | Wet | ||||||||
| S | Ti6Al4V | …ER | |||||||
| Ti alloys 37 | 3.7164 | HRC 34-36 | IC330 | 35-40 | 0.08-0.12 | (emulsion) | |||
| (Grade 5) | |||||||||
| H | IC808/ | ||||||||
| Hardened steel | 38 | 4340 | 1.6582 | HRC 45 max | …ETR | 70-100 | 0.08-0.1 | Air blow |
IC908 The table data refers to a cutter overhang of up to 4xD and the maximal width of cut Ae=0.7xD (D-the diameter of a cutter) The maximal depth of cut Ap is 2.5 mm for hardened steel and 3 mm for other material groups * ISCAR material group in accordance with VDI 3323 standard
** Quenched and tempered