| BCM-MM Ball Nose Endmills with MULTI-MASTER Threaded Adap Carrying Tangent Straight Edge I | tation nserts | | | | | r D | T(1) ap L5 | TS | D3 | | | Rd° |
| for Finish Profiling | | | | | | | L6 | | | | | |
| Designation | D | r | ap | Z | L5 | L6 | T(1) | D3 | Ts | | kg | Insert |
| BCM D12-MMT08 | 12.00 | 6.00 | 9.60 | 2 | 20.00 | 28.00 | 10.0 | 11.50 | T08 | N | 0.013 | BCR D120 |
| BCM D16-MMT10 | 16.00 | 8.00 | 12.70 | 2 | 25.00 | 36.80 | 13.0 | 15.20 | T10 | N | 0.028 | BCR D160 |
| BCM D20-MMT12 | 20.00 | 10.00 | 17.00 | 2 | 35.00 | 48.80 | 15.0 | 18.50 | T12 | N | 0.059 | BCR D200 |
| BCM D25-MMT15-C | 25.00 | 12.50 | 20.00 | 2 | 40.00 | 57.00 | 19.0 | 24.00 | T15 | Y | 0.104 | BCR D250 |
- Do not apply lubricant to the MULTI-MASTER threaded connection
- For adaptation options, see page 227
- For user guide, see pages 462-468
(1) Clamping wrench size For inserts, see pages: BCR (455) For holders, see pages: MM CAB (69) MM S-A (stepped shanks) (63) MM S-A (straight shanks) (65) MM S-A-C# (68) MM S-A-HSK (68) MM S-A-N (64)
- MM S-A-SK (68)
- MM S-B (85° conical shanks) (65)
- MM S-D (89° conical shanks) (66)
- MM S-ER (67)
- MM S-ER-H (67)
- MM TS-A (64)
| Spare Parts | | | | |
| Designation | | | | |
| BCM D12-MMT08 | SR 10503457 | T-6/51 | | |
| BCM D16-MMT10 | SR 34-505/1 MHG 2.5X7.2 | T-8/53 | | |
| BCM D20-MMT12 | SR 34-506/L | T-9/51 | | |
| BCM D25-MMT15-C | SR 14-601 | | BLD T15/S7 | SW6-T |
| E93CN | | | | D | | | | | d | | | |
| Toroidal Bull Nose Endmills with CNHT...and ENHT... Inserts | | | | ap 3° | | H L | | | | | Rd° | |
| Designation | D(1) | ap | Z H | L | Rd° | d | Shank(2) | kg | Insert | | | |
| E93CN D16-2-L100-C15-07 | 16.00 | 5.00 | 2 20.00 | 100.00 | 4.0 | 15.00 | C | 0.128 | CNHT 07 | SR 34-505 | /LHG | T-8/53 |
| E93CN D16-2-L110-C16-07 | 16.00 | 5.00 | 2 50.00 | 110.00 | 4.0 | 16.00 | C | 0.146 | CNHT 07 | SR 34-505 | /LHG | T-8/53 |
| E93CN D20-3-L140-C19-07 | 20.00 | 5.00 | 3 20.00 | 140.00 | 3.0 | 19.00 | C | 0.289 | CNHT 07 | SR 34-505 | /LHG | T-8/53 |
| E93CN D20-3-L160-C20-07 | 20.00 | 5.00 | 3 75.00 | 160.00 | 3.0 | 20.00 | C | 0.334 | CNHT 07 | SR 34-505 | /LHG | T-8/53 |
| E93CN D25-4-L160-C24-07 | 25.00 | 5.00 | 4 20.00 | 160.00 | 2.0 | 24.00 | C | 0.539 | CNHT 07 | SR 34-505 | /LHG | T-8/53 |
| E93CN D25-4-L180-C25-07 | 25.00 | 5.00 | 4 100.00 | 180.00 | 2.0 | 25.00 | C | 0.602 | CNHT 07 | SR 34-505 | /LHG | T-8/53 |
| E93CN D25-2-L180-C25-10 | 25.00 | 8.00 | 2 100.00 | 180.00 | 7.0 | 25.00 | C | 0.566 | ENHT 10 | SR 34-50 | 6/L | T-9/51 |
| E93CN D35-3-L200-C32-10 | 35.00 | 8.00 | 3 50.00 | 200.00 | 4.0 | 32.00 | C | 1.178 | ENHT 10 | SR 34-50 | 6/L | T-9/51 |
(1) The specified diameter is for inserts with a 1.0 mm radius. For other radii options, see diameter change in the table below (2) C-Cylindrical For inserts, see pages: CNHT/MT 07 (459) ENHT (460)
Diameter Change According to Insert Radius
| R | 0.8 | 1.0 | 1.5 | 2.0 | 2.5 | 3.0 |
| ∆D | +0.03 | 0.0 | -0.07 | -0.14 | -0.21 | -0.28 |
Каталог Iscar токарные пластины ISO 2022
Каталог Iscar инструмент для фрезерования
Каталог Iscar решения для глубокого сверления
Каталог Iscar полирующие фрезы
Новые режущие инструменты Iscar 2026
Каталог Iscar новые продукты 2018