Каталог Iscar токарный инструмент 2017 - страница 403

PARTING
W C
TAG N-C/W/M W R W R
Single-Ended Inserts for Parting, 7º
Grooving and Slitting Bars, Hard
Materials and Tough Applications

Recommended
Dimensions Tough 1 Hard
Machining Data


IC5400


IC30N
IC830
IC928


IC808
IC908


IC807
f groove


IC20
Designation W W tol(±) R±0.04 (mm/rev)
TAG N1.4C 1.40 0.05 0.16 • 0.04-0.10
TAG N1.6C 1.60 0.05 0.16 • • 0.04-0.14
TAG N2C 2.00 0.05 0.20 • • • • • 0.05-0.16
TAG N2.4C 2.40 0.04 0.16 • • 0.06-0.18
TAG N3CB (1) 3.00 0.05 0.35 • • 0.12-0.30
TAG N3C 3.05 0.05 0.20 • • • • • • • • 0.10-0.25
TAG N3M (2) 3.05 0.05 0.20 • • 0.06-0.18
TAG N3W 3.05 0.05 0.20 • • 0.10-0.25
TAG N4C 4.00 0.05 0.24 • • • • • • • 0.10-0.30
TAG N4CB (1) 4.00 0.05 0.40 • • 0.10-0.33
TAG N4M (2) 4.00 0.05 0.24 • • 0.06-0.20
TAG N4W 4.00 0.05 0.24 • • 0.10-0.30
TAG N4.8C 4.80 0.05 0.30 • • 0.10-0.35
TAG N5C 5.05 0.05 0.25 • • • 0.10-0.35
TAG N6.3C 6.30 0.10 0.35 • • 0.15-0.40
TAG N7W 7.00 0.10 0.50 • • 0.18-0.40
TAG N8C 8.00 0.10 0.50 • • 0.20-0.70
TAG N9.5C 9.50 0.10 0.50 • • 0.25-0.80
TAG N9.5W 9.50 0.10 0.50 • • 0.22-0.80
TAG N12.7W 12.70 0.10 0.85 • • 0.30-0.80
• Feed values for grade IC20 should be decreased by 50% • For cutting speed recommendations and user guide, see pages 416-422
(1) Larger corner radii for interrupted cut and high feed applications
(2) Similar to C-type, but with a modified edge; Improved chip control at medium feeds
For tools, see pages: TAGPAD-JHP (394) • TAGPAD-XL-JHP (394) • TGAD (393) • TGBHR/L (282) • TGBHR/L-JHP (283) • TGFH-JHP (390) • TGFH-MB
(393) • TGFH-S (390) • TGFH/R/L (283) • TGFHL-TR (398) • TGFHR/L (391) • TGFHR/L-JHP (391) • TGFS (395) • TGSU (392) • TGTR/L-2T..SH-L120 (397) •
TGTR/L-D (398) • TGTR/L-IQ (396) • TGTR/L-IQ-2Z (396) • TGTR/L-JHP (397)


R W W R
TAG R/L-C faº faº 7º
Single-Ended Inserts for Parting
Bars, Hard Materials and
Tough Parting Applications
L R

Recommended
Dimensions Tough 1 Hard
Machining Data
IC30N
IC830
IC928
IC808
IC908


f groove
Designation W±0.10 R±0.05 fa° W tol(±) (mm/rev)
TAG R/L2C-6D 2.05 0.20 6.0 0.10 • • 0.04-0.12
TAG R2.4C-8D 2.40 0.16 8.0 0.10 • 0.05-0.13
TAG R/L3C-6D 3.00 0.20 6.0 0.10 • • • • 0.08-0.18
TAG R3C-8D 3.00 0.20 8.0 0.10 • 0.06-0.16
TAG R/L3C-15D 3.00 0.20 15.0 0.10 • • • • 0.08-0.16
TAG R/L4C-4D 4.05 0.24 4.0 0.10 • • • • 0.08-0.20
TAG R/L5C-4D 5.05 0.25 4.0 0.10 • • 0.10-0.25
TAG R/L6.3C-4D 6.35 0.35 4.0 0.10 • • 0.12-0.30
• For cutting speed recommendations and user guide, see pages 416-422
For tools, see pages: TAGPAD-JHP (394) • TAGPAD-XL-JHP (394) • TGAD (393) • TGBHR/L (282) • TGFH-JHP (390) • TGFH-MB (393) • TGFH-S (390) •
TGFH/R/L (283) • TGFHL-TR (398) • TGFHR/L (391) • TGFHR/L-JHP (391) • TGFS (395) • TGSU (392) • TGTR/L-2T..SH-L120 (397) • TGTR/L-D (398) •
TGTR/L-IQ (396) • TGTR/L-IQ-2Z (396) • TGTR/L-JHP (397)


399