| DGTR/L-XL Integral Shank Reinforced Parting and Grooving Tools for Parting Up to 65 mm Diameters | | | | f Dma | l2 h A W x. | l1 h4 | | h b | | Left-ha | nd shown |
| Designation | W | Dmax | h | b | A | l1 | l2 | f | h4 | | |
| DGTR/L 20B-2XL-D60 | 2.00 | 60.0 | 20.0 | 20.0 | 1.74 | 150.00 | 41.3 | 19.1 | 8.0 | SR M4X35DIN912 | HW 3.0 |
| DGTR/L 25B-2XL-D60 | 2.00 | 60.0 | 25.0 | 25.0 | 1.74 | 150.00 | 41.3 | 24.1 | 3.0 | SR M4X35DIN912 | HW 3.0 |
| DGTR/L 20B-3XL-D65 | 3.00 | 65.0 | 20.0 | 20.0 | 2.40 | 150.00 | 41.3 | 18.8 | 12.0 | SR M5X40DIN912 | HW 4.0 |
| DGTR/L 25B-3XL-D65 | 3.00 | 65.0 | 25.0 | 25.0 | 2.40 | 150.00 | 41.3 | 23.8 | 7.0 | SR M5X40DIN912 | HW 4.0 |
- For insert depth capacity table, see page 377
- For user guide, see pages 416-422
For inserts, see pages: DGN-C-XL (387) DGN-J-XL (388) DGR/L-C-XL (388) DGR/L-J-XL (388)
| Depth of | Cut Function | of Workpiece Di | ameter | |
| Tmax/Dmax DGTR/L...-2 | for XL | Tmax/Dmax DGTR/L...-3 | for XL | |
| Tmax | Dmax | Tmax | Dmax | |
| 15 | No limit | 15 | No limit | Tmax |
| 16 | 600 | 16 | 1000 | |
| 17 | 300 | 17 | 400 | |
| 18 | 200 | 18 | 300 | |
| 19 | 150 | 19 | 230 | |
| 20 | 130 | 20 | 180 | |
| 21 | 120 | 21 | 150 | |
| 22 | 100 | 22 | 130 | |
| 23 | 90 | 23 | 115 | D |
| 24 | 85 | 24 | 105 | max |
| 25 | 80 | 25 | 95 | |
| 26 | 75 | 26 | 90 | |
| 27 | 70 | 27 | 85 | |
| 28 | 65 | 28 | 80 | |
| 29 | 63 | 29 | 75 | |
| 30 | 60 | 30 | 72 | |
| | 31 | 70 | |
| | 32.5 | 65 | |
| f1 h2 H5 | l1 L6 L5 | T21 | T11 | | |
| DGHAL-DECO Holders for DGAD Adapters for Tornos Bechler Deco Machines | h H2 b | (a) W (a | ) T22 T23 T24 T25 | T12 T13 T14 T15 | Left-hand show (a)See adapter | n • dimensions |
| Designation | h b | l1 f1 | h2 | H2 H5 | L6 | L5 |
| DGHAL DECO 7-10(1) | 40.3 18. | 2 106.00 15.0 | - | 12.8 4.8 | 52.00 | 69.00 |
| DGHAL DECO 13(2) | 42.0 35. | 2 115.00 28.7 | 2.0 | 16.0 16.0 | 60.00 | 60.00 |
| DGHAL DECO 20-26(2) | 44.8 23. | 2 120.00 20.0 | 4.0 | 17.0 17.0 | 65.00 | 65.00 |
- DGAD-... HGAD-... adapters should be ordered separately
(1) Positioning combinations: T11; T25 (2) Positioning combinations: All For tools, see pages: DGAD-B-D (379) DGAD/HGAD (378) SCLCR-PAD (47) SDJCR-PAD (51) SVJCR-PAD (56) SWAPR-PAD (62)
Spare Parts
| Designation | | | | | | | |
| DGHAL DECO 7-10 | SR 14-519-L9.7 | HW 4.0 | SR 16-212-L9.5 | T-20/5 | SR 16-212 | SR M5X25DIN912 | |
| DGHAL DECO 13 | SR 14-519-L9.7 | HW 5.0 | SR 16-212-L7.5 | T-20/5 | SR 16-212 | SR M6X25 DIN912 | |
| DGHAL DECO 20-26 | SR 14-519-L12.8 | HW 5.0 | SR 16-212-L7.5 | T-20/5 | SR 16-212 | SR M6X25 DIN912 | EZ 104 |
Каталог Iscar резьбонарезные фрезы
Каталог Iscar инструмент для обработки алюминиевых колёс
Каталог Iscar державки и пластины для нарезания резьбы 2022
Каталог Iscar расточные системы 2022
Каталог Iscar высокоточные развертки и метчики 2022
Токарные инструменты Iscar (часть 2) 2026